{"title":"BHT \/ BMT Series BEARHUG Locknuts – All-Metal, High Temperature","description":"\u003cp\u003eBHT (inch) and BMT (metric) are the all-metal BEARHUG locknuts. The polymer locking ring is replaced by an all-hardened-alloy prevailing-torque design, which lifts the maximum operating temperature from 160°F to 300°F. Use them wherever a standard BEARHUG nut would sit too close to a heat source for the polymer ring to survive.\u003c\/p\u003e\n\u003ch2\u003eBHT \/ BMT Series Specifications\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePart numbers:\u003c\/strong\u003e BHT-02 through BHT-14; BMT-02 through BMT-14 (26 sizes stocked)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBore \/ shaft size (inch):\u003c\/strong\u003e 0.586 in to 2.751 in\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOutside diameter (inch):\u003c\/strong\u003e 1 in to 3.625 in\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBore \/ shaft size (metric):\u003c\/strong\u003e 15 mm to 70 mm\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOutside diameter (metric):\u003c\/strong\u003e 25 mm to 92 mm\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial \u0026amp; temperature:\u003c\/strong\u003e All-metal hardened alloy steel, no polymer element; 300°F maximum operating temperature\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eStandards:\u003c\/strong\u003e BHT to ANSI\/ABMA 8.2-1999, BMT to ISO 2982-2:2013(E); made in USA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eApplications\u003c\/h2\u003e\n\u003cp\u003eKiln and oven drives, hot rolling and casting lines, turbine and engine accessories, dryer sections and any bearing running above the polymer limit.\u003c\/p\u003e\n\u003ch2\u003eRelated Whittet-Higgins Series\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\u003ca href=\"\/collections\/bh-bm-series\"\u003eBH Series BEARHUG Locknuts – Inch\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"\/collections\/bm-series-locknut-bearhug-metric\"\u003eBM Series BEARHUG Locknuts – Metric\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"\/collections\/tln-tlm-series-locknut-tangentlok\"\u003eTLN \/ TLM Series TANGENTLOK Locknuts\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"\/collections\/bl-series\"\u003eBL \/ BLM Series BEARLOK Locknuts\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"\/collections\/htw-series-hardened-tongued-washers\"\u003eHTW Series Hardened Tongued Washers\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eApollo is an authorized Whittet-Higgins distributor. Every part on this page is genuine Whittet-Higgins, manufactured in the USA. Need a size that is not listed, or help matching a locknut to its lockwasher and assembly socket? \u003ca href=\"\/pages\/contact\"\u003eContact our team\u003c\/a\u003e.\u003c\/p\u003e","products":[{"product_id":"whittet-higgins-bht-02","title":"Whittet Higgins BHT-02 Bearhug Locknut, All Steel","description":"\u003cp\u003eThe Whittet-Higgins BHT-02 is a BEARHUG heat-resistant bearing locknut: an all-metal, self-contained retaining device that threads onto a shaft to position, preload, and secure bearings, sleeves, and similar components against a shoulder. Its hardened alloy body carries high axial loads, while an integral spring-steel locking ring delivers prevailing-torque self-locking that holds the assembly tight against vibration, shock, and applied torque.\u003c\/p\u003e\u003cp\u003eBecause the locking action is built in, the BHT-02 installs faster than a traditional locknut-and-lockwasher pair, needs no cut or repaired shaft keyway, and does not damage the shaft threads when tightened, while still allowing infinite adjustment and preloading. Rated for continuous service up to 300°F, it meets and exceeds ANSI\/ABMA 8.2-1999 and is manufactured in the USA to be RoHS compliant.\u003c\/p\u003e","brand":"Whittet-Higgins","offers":[{"title":"Default Title","offer_id":46304072040598,"sku":null,"price":42.33,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0305\/1241\/4779\/files\/BH_Camera_SOLIDWORKSViewport_d24d003b-6151-40a0-8dda-4985a64c9afc.png?v=1786814072"},{"product_id":"whittet-higgins-bht-03","title":"Whittet Higgins BHT-03 Bearhug Locknut, All Steel","description":"\u003cp\u003eThe Whittet-Higgins BHT-03 is a BEARHUG heat-resistant bearing locknut: an all-metal, self-contained retaining device that threads onto a shaft to position, preload, and secure bearings, sleeves, and similar components against a shoulder. Its hardened alloy body carries high axial loads, while an integral spring-steel locking ring delivers prevailing-torque self-locking that holds the assembly tight against vibration, shock, and applied torque.\u003c\/p\u003e\u003cp\u003eBecause the locking action is built in, the BHT-03 installs faster than a traditional locknut-and-lockwasher pair, needs no cut or repaired shaft keyway, and does not damage the shaft threads when tightened, while still allowing infinite adjustment and preloading. Rated for continuous service up to 300°F, it meets and exceeds ANSI\/ABMA 8.2-1999 and is manufactured in the USA to be RoHS compliant.\u003c\/p\u003e","brand":"Whittet-Higgins","offers":[{"title":"Default Title","offer_id":46304072073366,"sku":null,"price":42.55,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0305\/1241\/4779\/files\/BH_Camera_SOLIDWORKSViewport_d24d003b-6151-40a0-8dda-4985a64c9afc.png?v=1786814072"},{"product_id":"whittet-higgins-bht-04","title":"Whittet Higgins BHT-04 Bearhug Locknut, All Steel","description":"\u003cp\u003eThe Whittet-Higgins BHT-04 is a BEARHUG heat-resistant bearing locknut: an all-metal, self-contained retaining device that threads onto a shaft to position, preload, and secure bearings, sleeves, and similar components against a shoulder. Its hardened alloy body carries high axial loads, while an integral spring-steel locking ring delivers prevailing-torque self-locking that holds the assembly tight against vibration, shock, and applied torque.\u003c\/p\u003e\u003cp\u003eBecause the locking action is built in, the BHT-04 installs faster than a traditional locknut-and-lockwasher pair, needs no cut or repaired shaft keyway, and does not damage the shaft threads when tightened, while still allowing infinite adjustment and preloading. Rated for continuous service up to 300°F, it meets and exceeds ANSI\/ABMA 8.2-1999 and is manufactured in the USA to be RoHS compliant.\u003c\/p\u003e","brand":"Whittet-Higgins","offers":[{"title":"Default Title","offer_id":46304072106134,"sku":null,"price":43.15,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0305\/1241\/4779\/files\/BH_Camera_SOLIDWORKSViewport_d24d003b-6151-40a0-8dda-4985a64c9afc.png?v=1786814072"},{"product_id":"whittet-higgins-bht-05","title":"Whittet Higgins BHT-05 Bearhug Locknut, All Steel","description":"\u003cp\u003eThe Whittet-Higgins BHT-05 is a BEARHUG heat-resistant bearing locknut: an all-metal, self-contained retaining device that threads onto a shaft to position, preload, and secure bearings, sleeves, and similar components against a shoulder. Its hardened alloy body carries high axial loads, while an integral spring-steel locking ring delivers prevailing-torque self-locking that holds the assembly tight against vibration, shock, and applied torque.\u003c\/p\u003e\u003cp\u003eBecause the locking action is built in, the BHT-05 installs faster than a traditional locknut-and-lockwasher pair, needs no cut or repaired shaft keyway, and does not damage the shaft threads when tightened, while still allowing infinite adjustment and preloading. Rated for continuous service up to 300°F, it meets and exceeds ANSI\/ABMA 8.2-1999 and is manufactured in the USA to be RoHS compliant.\u003c\/p\u003e","brand":"Whittet-Higgins","offers":[{"title":"Default Title","offer_id":46304072138902,"sku":null,"price":44.78,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0305\/1241\/4779\/files\/BH_Camera_SOLIDWORKSViewport_d24d003b-6151-40a0-8dda-4985a64c9afc.png?v=1786814072"},{"product_id":"whittet-higgins-bht-06","title":"Whittet Higgins BHT-06 Bearhug Locknut, All Steel","description":"\u003cp\u003eThe Whittet-Higgins BHT-06 is a BEARHUG heat-resistant bearing locknut: an all-metal, self-contained retaining device that threads onto a shaft to position, preload, and secure bearings, sleeves, and similar components against a shoulder. Its hardened alloy body carries high axial loads, while an integral spring-steel locking ring delivers prevailing-torque self-locking that holds the assembly tight against vibration, shock, and applied torque.\u003c\/p\u003e\u003cp\u003eBecause the locking action is built in, the BHT-06 installs faster than a traditional locknut-and-lockwasher pair, needs no cut or repaired shaft keyway, and does not damage the shaft threads when tightened, while still allowing infinite adjustment and preloading. Rated for continuous service up to 300°F, it meets and exceeds ANSI\/ABMA 8.2-1999 and is manufactured in the USA to be RoHS compliant.\u003c\/p\u003e","brand":"Whittet-Higgins","offers":[{"title":"Default Title","offer_id":46304072171670,"sku":null,"price":45.66,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0305\/1241\/4779\/files\/BH_Camera_SOLIDWORKSViewport_d24d003b-6151-40a0-8dda-4985a64c9afc.png?v=1786814072"},{"product_id":"whittet-higgins-bht-07","title":"Whittet Higgins BHT-07 Bearhug Locknut, All Steel","description":"\u003cp\u003eThe Whittet-Higgins BHT-07 is a BEARHUG heat-resistant bearing locknut: an all-metal, self-contained retaining device that threads onto a shaft to position, preload, and secure bearings, sleeves, and similar components against a shoulder. Its hardened alloy body carries high axial loads, while an integral spring-steel locking ring delivers prevailing-torque self-locking that holds the assembly tight against vibration, shock, and applied torque.\u003c\/p\u003e\u003cp\u003eBecause the locking action is built in, the BHT-07 installs faster than a traditional locknut-and-lockwasher pair, needs no cut or repaired shaft keyway, and does not damage the shaft threads when tightened, while still allowing infinite adjustment and preloading. Rated for continuous service up to 300°F, it meets and exceeds ANSI\/ABMA 8.2-1999 and is manufactured in the USA to be RoHS compliant.\u003c\/p\u003e","brand":"Whittet-Higgins","offers":[{"title":"Default Title","offer_id":46304072204438,"sku":null,"price":47.4,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0305\/1241\/4779\/files\/BH_Camera_SOLIDWORKSViewport_d24d003b-6151-40a0-8dda-4985a64c9afc.png?v=1786814072"},{"product_id":"whittet-higgins-bht-08","title":"Whittet Higgins BHT-08 Bearhug Locknut, All Steel","description":"\u003cp\u003eThe Whittet-Higgins BHT-08 is a BEARHUG heat-resistant bearing locknut: an all-metal, self-contained retaining device that threads onto a shaft to position, preload, and secure bearings, sleeves, and similar components against a shoulder. Its hardened alloy body carries high axial loads, while an integral spring-steel locking ring delivers prevailing-torque self-locking that holds the assembly tight against vibration, shock, and applied torque.\u003c\/p\u003e\u003cp\u003eBecause the locking action is built in, the BHT-08 installs faster than a traditional locknut-and-lockwasher pair, needs no cut or repaired shaft keyway, and does not damage the shaft threads when tightened, while still allowing infinite adjustment and preloading. Rated for continuous service up to 300°F, it meets and exceeds ANSI\/ABMA 8.2-1999 and is manufactured in the USA to be RoHS compliant.\u003c\/p\u003e","brand":"Whittet-Higgins","offers":[{"title":"Default Title","offer_id":46304072237206,"sku":null,"price":49.1,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0305\/1241\/4779\/files\/BH_Camera_SOLIDWORKSViewport_d24d003b-6151-40a0-8dda-4985a64c9afc.png?v=1786814072"},{"product_id":"whittet-higgins-bht-09","title":"Whittet Higgins BHT-09 Bearhug Locknut, All Steel","description":"\u003cp\u003eThe Whittet-Higgins BHT-09 is a BEARHUG heat-resistant bearing locknut: an all-metal, self-contained retaining device that threads onto a shaft to position, preload, and secure bearings, sleeves, and similar components against a shoulder. Its hardened alloy body carries high axial loads, while an integral spring-steel locking ring delivers prevailing-torque self-locking that holds the assembly tight against vibration, shock, and applied torque.\u003c\/p\u003e\u003cp\u003eBecause the locking action is built in, the BHT-09 installs faster than a traditional locknut-and-lockwasher pair, needs no cut or repaired shaft keyway, and does not damage the shaft threads when tightened, while still allowing infinite adjustment and preloading. Rated for continuous service up to 300°F, it meets and exceeds ANSI\/ABMA 8.2-1999 and is manufactured in the USA to be RoHS compliant.\u003c\/p\u003e","brand":"Whittet-Higgins","offers":[{"title":"Default Title","offer_id":46304072269974,"sku":null,"price":54.64,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0305\/1241\/4779\/files\/BH_Camera_SOLIDWORKSViewport_d24d003b-6151-40a0-8dda-4985a64c9afc.png?v=1786814072"},{"product_id":"whittet-higgins-bht-10","title":"Whittet Higgins BHT-10 Bearhug Locknut, All Steel","description":"\u003cp\u003eThe Whittet-Higgins BHT-10 is a BEARHUG heat-resistant bearing locknut: an all-metal, self-contained retaining device that threads onto a shaft to position, preload, and secure bearings, sleeves, and similar components against a shoulder. Its hardened alloy body carries high axial loads, while an integral spring-steel locking ring delivers prevailing-torque self-locking that holds the assembly tight against vibration, shock, and applied torque.\u003c\/p\u003e\u003cp\u003eBecause the locking action is built in, the BHT-10 installs faster than a traditional locknut-and-lockwasher pair, needs no cut or repaired shaft keyway, and does not damage the shaft threads when tightened, while still allowing infinite adjustment and preloading. Rated for continuous service up to 300°F, it meets and exceeds ANSI\/ABMA 8.2-1999 and is manufactured in the USA to be RoHS compliant.\u003c\/p\u003e","brand":"Whittet-Higgins","offers":[{"title":"Default Title","offer_id":46304072302742,"sku":null,"price":57.17,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0305\/1241\/4779\/files\/BH_Camera_SOLIDWORKSViewport_d24d003b-6151-40a0-8dda-4985a64c9afc.png?v=1786814072"},{"product_id":"whittet-higgins-bht-11","title":"Whittet Higgins BHT-11 Bearhug Locknut, All Steel","description":"\u003cp\u003eThe Whittet-Higgins BHT-11 is a BEARHUG heat-resistant bearing locknut: an all-metal, self-contained retaining device that threads onto a shaft to position, preload, and secure bearings, sleeves, and similar components against a shoulder. Its hardened alloy body carries high axial loads, while an integral spring-steel locking ring delivers prevailing-torque self-locking that holds the assembly tight against vibration, shock, and applied torque.\u003c\/p\u003e\u003cp\u003eBecause the locking action is built in, the BHT-11 installs faster than a traditional locknut-and-lockwasher pair, needs no cut or repaired shaft keyway, and does not damage the shaft threads when tightened, while still allowing infinite adjustment and preloading. Rated for continuous service up to 300°F, it meets and exceeds ANSI\/ABMA 8.2-1999 and is manufactured in the USA to be RoHS compliant.\u003c\/p\u003e","brand":"Whittet-Higgins","offers":[{"title":"Default Title","offer_id":46304072335510,"sku":null,"price":58.72,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0305\/1241\/4779\/files\/BH_Camera_SOLIDWORKSViewport_d24d003b-6151-40a0-8dda-4985a64c9afc.png?v=1786814072"},{"product_id":"whittet-higgins-bht-12","title":"Whittet Higgins BHT-12 Bearhug Locknut, All Steel","description":"\u003cp\u003eThe Whittet-Higgins BHT-12 is a BEARHUG heat-resistant bearing locknut: an all-metal, self-contained retaining device that threads onto a shaft to position, preload, and secure bearings, sleeves, and similar components against a shoulder. Its hardened alloy body carries high axial loads, while an integral spring-steel locking ring delivers prevailing-torque self-locking that holds the assembly tight against vibration, shock, and applied torque.\u003c\/p\u003e\u003cp\u003eBecause the locking action is built in, the BHT-12 installs faster than a traditional locknut-and-lockwasher pair, needs no cut or repaired shaft keyway, and does not damage the shaft threads when tightened, while still allowing infinite adjustment and preloading. Rated for continuous service up to 300°F, it meets and exceeds ANSI\/ABMA 8.2-1999 and is manufactured in the USA to be RoHS compliant.\u003c\/p\u003e","brand":"Whittet-Higgins","offers":[{"title":"Default Title","offer_id":46304072368278,"sku":null,"price":60.29,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0305\/1241\/4779\/files\/BH_Camera_SOLIDWORKSViewport_d24d003b-6151-40a0-8dda-4985a64c9afc.png?v=1786814072"},{"product_id":"whittet-higgins-bht-13","title":"Whittet Higgins BHT-13 Bearhug Locknut, All Steel","description":"\u003cp\u003eThe Whittet-Higgins BHT-13 is a BEARHUG heat-resistant bearing locknut: an all-metal, self-contained retaining device that threads onto a shaft to position, preload, and secure bearings, sleeves, and similar components against a shoulder. Its hardened alloy body carries high axial loads, while an integral spring-steel locking ring delivers prevailing-torque self-locking that holds the assembly tight against vibration, shock, and applied torque.\u003c\/p\u003e\u003cp\u003eBecause the locking action is built in, the BHT-13 installs faster than a traditional locknut-and-lockwasher pair, needs no cut or repaired shaft keyway, and does not damage the shaft threads when tightened, while still allowing infinite adjustment and preloading. Rated for continuous service up to 300°F, it meets and exceeds ANSI\/ABMA 8.2-1999 and is manufactured in the USA to be RoHS compliant.\u003c\/p\u003e","brand":"Whittet-Higgins","offers":[{"title":"Default Title","offer_id":46304072401046,"sku":null,"price":64.03,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0305\/1241\/4779\/files\/BH_Camera_SOLIDWORKSViewport_d24d003b-6151-40a0-8dda-4985a64c9afc.png?v=1786814072"},{"product_id":"whittet-higgins-bht-14","title":"Whittet Higgins BHT-14 Bearhug Locknut, All Steel","description":"\u003cp\u003eThe Whittet-Higgins BHT-14 is a BEARHUG heat-resistant bearing locknut: an all-metal, self-contained retaining device that threads onto a shaft to position, preload, and secure bearings, sleeves, and similar components against a shoulder. Its hardened alloy body carries high axial loads, while an integral spring-steel locking ring delivers prevailing-torque self-locking that holds the assembly tight against vibration, shock, and applied torque.\u003c\/p\u003e\u003cp\u003eBecause the locking action is built in, the BHT-14 installs faster than a traditional locknut-and-lockwasher pair, needs no cut or repaired shaft keyway, and does not damage the shaft threads when tightened, while still allowing infinite adjustment and preloading. Rated for continuous service up to 300°F, it meets and exceeds ANSI\/ABMA 8.2-1999 and is manufactured in the USA to be RoHS compliant.\u003c\/p\u003e","brand":"Whittet-Higgins","offers":[{"title":"Default Title","offer_id":46304072433814,"sku":null,"price":67.16,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0305\/1241\/4779\/files\/BH_Camera_SOLIDWORKSViewport_d24d003b-6151-40a0-8dda-4985a64c9afc.png?v=1786814072"},{"product_id":"whittet-higgins-bmt-02","title":"Whittet Higgins BMT-02 Bearhug Locknut, All Steel","description":"\u003cp\u003eThe Whittet-Higgins BMT-02 is a BEARHUG heat-resistant, prevailing-torque self-locking bearing locknut from the metric BMT series. Its all-metal construction pairs a hardened alloy locknut body with a spring steel locking ring, so it threads onto a shaft or spindle and holds position through prevailing torque rather than a separate lockwasher or a bent keyway tab.\u003c\/p\u003e\u003cp\u003eThe self-locking action resists loosening from vibration, shock, and torque while still allowing infinite axial adjustment and preloading, and it secures without damaging the shaft threads. Built for high-temperature, high-precision, and balanced assembly applications, it carries a 300 degrees F maximum operating temperature and meets and exceeds the specifications of ISO 2982-2:2013(E).\u003c\/p\u003e","brand":"Whittet-Higgins","offers":[{"title":"Default Title","offer_id":46304073842838,"sku":null,"price":44.78,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0305\/1241\/4779\/files\/BH_Camera_SOLIDWORKSViewport.png?v=1757277855"},{"product_id":"whittet-higgins-bmt-03","title":"Whittet Higgins BMT-03 Bearhug Locknut, All Steel","description":"\u003cp\u003eThe Whittet-Higgins BMT-03 is a BEARHUG heat-resistant, prevailing-torque self-locking bearing locknut from the metric BMT series. Its all-metal construction pairs a hardened alloy locknut body with a spring steel locking ring, so it threads onto a shaft or spindle and holds position through prevailing torque rather than a separate lockwasher or a bent keyway tab.\u003c\/p\u003e\u003cp\u003eThe self-locking action resists loosening from vibration, shock, and torque while still allowing infinite axial adjustment and preloading, and it secures without damaging the shaft threads. Built for high-temperature, high-precision, and balanced assembly applications, it carries a 300 degrees F maximum operating temperature and meets and exceeds the specifications of ISO 2982-2:2013(E).\u003c\/p\u003e","brand":"Whittet-Higgins","offers":[{"title":"Default Title","offer_id":46304073875606,"sku":null,"price":45.02,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0305\/1241\/4779\/files\/BH_Camera_SOLIDWORKSViewport.png?v=1757277855"},{"product_id":"whittet-higgins-bmt-04","title":"Whittet Higgins BMT-04 Bearhug Locknut, All Steel","description":"\u003cp\u003eThe Whittet-Higgins BMT-04 is a BEARHUG heat-resistant, prevailing-torque self-locking bearing locknut from the metric BMT series. Its all-metal construction pairs a hardened alloy locknut body with a spring steel locking ring, so it threads onto a shaft or spindle and holds position through prevailing torque rather than a separate lockwasher or a bent keyway tab.\u003c\/p\u003e\u003cp\u003eThe self-locking action resists loosening from vibration, shock, and torque while still allowing infinite axial adjustment and preloading, and it secures without damaging the shaft threads. Built for high-temperature, high-precision, and balanced assembly applications, it carries a 300 degrees F maximum operating temperature and meets and exceeds the specifications of ISO 2982-2:2013(E).\u003c\/p\u003e","brand":"Whittet-Higgins","offers":[{"title":"Default Title","offer_id":46304073908374,"sku":null,"price":45.7,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0305\/1241\/4779\/files\/BH_Camera_SOLIDWORKSViewport.png?v=1757277855"},{"product_id":"whittet-higgins-bmt-05","title":"Whittet Higgins BMT-05 Bearhug Locknut, All Steel","description":"\u003cp\u003eThe Whittet-Higgins BMT-05 is a BEARHUG heat-resistant, prevailing-torque self-locking bearing locknut from the metric BMT series. Its all-metal construction pairs a hardened alloy locknut body with a spring steel locking ring, so it threads onto a shaft or spindle and holds position through prevailing torque rather than a separate lockwasher or a bent keyway tab.\u003c\/p\u003e\u003cp\u003eThe self-locking action resists loosening from vibration, shock, and torque while still allowing infinite axial adjustment and preloading, and it secures without damaging the shaft threads. Built for high-temperature, high-precision, and balanced assembly applications, it carries a 300 degrees F maximum operating temperature and meets and exceeds the specifications of ISO 2982-2:2013(E).\u003c\/p\u003e","brand":"Whittet-Higgins","offers":[{"title":"Default Title","offer_id":46304073973910,"sku":null,"price":47.49,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0305\/1241\/4779\/files\/BH_Camera_SOLIDWORKSViewport.png?v=1757277855"},{"product_id":"whittet-higgins-bmt-06","title":"Whittet Higgins BMT-06 Bearhug Locknut, All Steel","description":"\u003cp\u003eThe Whittet-Higgins BMT-06 is a BEARHUG heat-resistant, prevailing-torque self-locking bearing locknut from the metric BMT series. Its all-metal construction pairs a hardened alloy locknut body with a spring steel locking ring, so it threads onto a shaft or spindle and holds position through prevailing torque rather than a separate lockwasher or a bent keyway tab.\u003c\/p\u003e\u003cp\u003eThe self-locking action resists loosening from vibration, shock, and torque while still allowing infinite axial adjustment and preloading, and it secures without damaging the shaft threads. Built for high-temperature, high-precision, and balanced assembly applications, it carries a 300 degrees F maximum operating temperature and meets and exceeds the specifications of ISO 2982-2:2013(E).\u003c\/p\u003e","brand":"Whittet-Higgins","offers":[{"title":"Default Title","offer_id":46304074006678,"sku":null,"price":48.45,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0305\/1241\/4779\/files\/BH_Camera_SOLIDWORKSViewport.png?v=1757277855"},{"product_id":"whittet-higgins-bmt-07","title":"Whittet Higgins BMT-07 Bearhug Locknut, All Steel","description":"\u003cp\u003eThe Whittet-Higgins BMT-07 is a BEARHUG heat-resistant, prevailing-torque self-locking bearing locknut from the metric BMT series. Its all-metal construction pairs a hardened alloy locknut body with a spring steel locking ring, so it threads onto a shaft or spindle and holds position through prevailing torque rather than a separate lockwasher or a bent keyway tab.\u003c\/p\u003e\u003cp\u003eThe self-locking action resists loosening from vibration, shock, and torque while still allowing infinite axial adjustment and preloading, and it secures without damaging the shaft threads. Built for high-temperature, high-precision, and balanced assembly applications, it carries a 300 degrees F maximum operating temperature and meets and exceeds the specifications of ISO 2982-2:2013(E).\u003c\/p\u003e","brand":"Whittet-Higgins","offers":[{"title":"Default Title","offer_id":46304074039446,"sku":null,"price":50.58,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0305\/1241\/4779\/files\/BH_Camera_SOLIDWORKSViewport.png?v=1757277855"},{"product_id":"whittet-higgins-bmt-08","title":"Whittet Higgins BMT-08 Bearhug Locknut, All Steel","description":"\u003cp\u003eThe Whittet-Higgins BMT-08 is a BEARHUG heat-resistant, prevailing-torque self-locking bearing locknut from the metric BMT series. Its all-metal construction pairs a hardened alloy locknut body with a spring steel locking ring, so it threads onto a shaft or spindle and holds position through prevailing torque rather than a separate lockwasher or a bent keyway tab.\u003c\/p\u003e\u003cp\u003eThe self-locking action resists loosening from vibration, shock, and torque while still allowing infinite axial adjustment and preloading, and it secures without damaging the shaft threads. Built for high-temperature, high-precision, and balanced assembly applications, it carries a 300 degrees F maximum operating temperature and meets and exceeds the specifications of ISO 2982-2:2013(E).\u003c\/p\u003e","brand":"Whittet-Higgins","offers":[{"title":"Default Title","offer_id":46304074072214,"sku":null,"price":41.8,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0305\/1241\/4779\/files\/BH_Camera_SOLIDWORKSViewport.png?v=1757277855"},{"product_id":"whittet-higgins-bmt-09","title":"Whittet Higgins BMT-09 Bearhug Locknut, All Steel","description":"\u003cp\u003eThe Whittet-Higgins BMT-09 is a BEARHUG heat-resistant, prevailing-torque self-locking bearing locknut from the metric BMT series. Its all-metal construction pairs a hardened alloy locknut body with a spring steel locking ring, so it threads onto a shaft or spindle and holds position through prevailing torque rather than a separate lockwasher or a bent keyway tab.\u003c\/p\u003e\u003cp\u003eThe self-locking action resists loosening from vibration, shock, and torque while still allowing infinite axial adjustment and preloading, and it secures without damaging the shaft threads. Built for high-temperature, high-precision, and balanced assembly applications, it carries a 300 degrees F maximum operating temperature and meets and exceeds the specifications of ISO 2982-2:2013(E).\u003c\/p\u003e","brand":"Whittet-Higgins","offers":[{"title":"Default Title","offer_id":46304074137750,"sku":null,"price":46.75,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0305\/1241\/4779\/files\/BH_Camera_SOLIDWORKSViewport.png?v=1757277855"},{"product_id":"whittet-higgins-bmt-10","title":"Whittet Higgins BMT-10 Bearhug Locknut, All Steel","description":"\u003cp\u003eThe Whittet-Higgins BMT-10 is a BEARHUG heat-resistant, prevailing-torque self-locking bearing locknut from the metric BMT series. Its all-metal construction pairs a hardened alloy locknut body with a spring steel locking ring, so it threads onto a shaft or spindle and holds position through prevailing torque rather than a separate lockwasher or a bent keyway tab.\u003c\/p\u003e\u003cp\u003eThe self-locking action resists loosening from vibration, shock, and torque while still allowing infinite axial adjustment and preloading, and it secures without damaging the shaft threads. Built for high-temperature, high-precision, and balanced assembly applications, it carries a 300 degrees F maximum operating temperature and meets and exceeds the specifications of ISO 2982-2:2013(E).\u003c\/p\u003e","brand":"Whittet-Higgins","offers":[{"title":"Default Title","offer_id":46304074170518,"sku":null,"price":61.13,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0305\/1241\/4779\/files\/BH_Camera_SOLIDWORKSViewport.png?v=1757277855"},{"product_id":"whittet-higgins-bmt-11","title":"Whittet Higgins BMT-11 Bearhug Locknut, All Steel","description":"\u003cp\u003eThe Whittet-Higgins BMT-11 is a BEARHUG heat-resistant, prevailing-torque self-locking bearing locknut from the metric BMT series. Its all-metal construction pairs a hardened alloy locknut body with a spring steel locking ring, so it threads onto a shaft or spindle and holds position through prevailing torque rather than a separate lockwasher or a bent keyway tab.\u003c\/p\u003e\u003cp\u003eThe self-locking action resists loosening from vibration, shock, and torque while still allowing infinite axial adjustment and preloading, and it secures without damaging the shaft threads. Built for high-temperature, high-precision, and balanced assembly applications, it carries a 300 degrees F maximum operating temperature and meets and exceeds the specifications of ISO 2982-2:2013(E).\u003c\/p\u003e","brand":"Whittet-Higgins","offers":[{"title":"Default Title","offer_id":46304074203286,"sku":null,"price":62.89,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0305\/1241\/4779\/files\/BH_Camera_SOLIDWORKSViewport.png?v=1757277855"},{"product_id":"whittet-higgins-bmt-12","title":"Whittet Higgins BMT-12 Bearhug Locknut, All Steel","description":"\u003cp\u003eThe Whittet-Higgins BMT-12 is a BEARHUG heat-resistant, prevailing-torque self-locking bearing locknut from the metric BMT series. Its all-metal construction pairs a hardened alloy locknut body with a spring steel locking ring, so it threads onto a shaft or spindle and holds position through prevailing torque rather than a separate lockwasher or a bent keyway tab.\u003c\/p\u003e\u003cp\u003eThe self-locking action resists loosening from vibration, shock, and torque while still allowing infinite axial adjustment and preloading, and it secures without damaging the shaft threads. Built for high-temperature, high-precision, and balanced assembly applications, it carries a 300 degrees F maximum operating temperature and meets and exceeds the specifications of ISO 2982-2:2013(E).\u003c\/p\u003e","brand":"Whittet-Higgins","offers":[{"title":"Default Title","offer_id":46304074236054,"sku":null,"price":65.25,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0305\/1241\/4779\/files\/BH_Camera_SOLIDWORKSViewport.png?v=1757277855"},{"product_id":"whittet-higgins-bmt-13","title":"Whittet Higgins BMT-13 Bearhug Locknut, All Steel","description":"\u003cp\u003eThe Whittet-Higgins BMT-13 is a BEARHUG heat-resistant, prevailing-torque self-locking bearing locknut from the metric BMT series. Its all-metal construction pairs a hardened alloy locknut body with a spring steel locking ring, so it threads onto a shaft or spindle and holds position through prevailing torque rather than a separate lockwasher or a bent keyway tab.\u003c\/p\u003e\u003cp\u003eThe self-locking action resists loosening from vibration, shock, and torque while still allowing infinite axial adjustment and preloading, and it secures without damaging the shaft threads. Built for high-temperature, high-precision, and balanced assembly applications, it carries a 300 degrees F maximum operating temperature and meets and exceeds the specifications of ISO 2982-2:2013(E).\u003c\/p\u003e","brand":"Whittet-Higgins","offers":[{"title":"Default Title","offer_id":46304074268822,"sku":null,"price":70.21,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0305\/1241\/4779\/files\/BH_Camera_SOLIDWORKSViewport.png?v=1757277855"},{"product_id":"whittet-higgins-bmt-14","title":"Whittet Higgins BMT-14 Bearhug Locknut, All Steel","description":"\u003cp\u003eThe Whittet-Higgins BMT-14 is a BEARHUG heat-resistant, prevailing-torque self-locking bearing locknut from the metric BMT series. Its all-metal construction pairs a hardened alloy locknut body with a spring steel locking ring, so it threads onto a shaft or spindle and holds position through prevailing torque rather than a separate lockwasher or a bent keyway tab.\u003c\/p\u003e\u003cp\u003eThe self-locking action resists loosening from vibration, shock, and torque while still allowing infinite axial adjustment and preloading, and it secures without damaging the shaft threads. Built for high-temperature, high-precision, and balanced assembly applications, it carries a 300 degrees F maximum operating temperature and meets and exceeds the specifications of ISO 2982-2:2013(E).\u003c\/p\u003e","brand":"Whittet-Higgins","offers":[{"title":"Default Title","offer_id":46304074301590,"sku":null,"price":74.7,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0305\/1241\/4779\/files\/BH_Camera_SOLIDWORKSViewport.png?v=1757277855"}],"url":"https:\/\/apollousa.com\/collections\/bht-bmt-series-bearhug-locknuts-all-steel.oembed","provider":"Apollo Industries ","version":"1.0","type":"link"}