{"title":"RTD \/ RTDM Series Rethreading Dies","description":"\u003cp\u003eA damaged shaft thread is usually why a locknut will not run down square, and a cocked nut is why the bearing fails again. RTD (inch) and RTDM (metric) rethreading dies clean and repair bearing shaft threads in place — chasing burrs, nicks and corrosion back to the original profile without cutting new material and without pulling the shaft. Sizes correspond directly to the Whittet-Higgins locknut thread series.\u003c\/p\u003e\n\u003ch2\u003eRTD \/ RTDM Series Specifications\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePart numbers:\u003c\/strong\u003e RTD-00 through RTD-40; RTDM-00 through RTDM-38 (65 sizes stocked)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBore \/ shaft size (inch):\u003c\/strong\u003e 0.391 in to 4.716 in\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBore \/ shaft size (metric):\u003c\/strong\u003e 10 mm to 120 mm\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial \u0026amp; temperature:\u003c\/strong\u003e Case-hardened carbon steel; 300°F maximum operating temperature\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eStandards:\u003c\/strong\u003e RTD to ANSI\/ABMA 8.2-1999, RTDM to ISO 2982-2:2013; made in USA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eApplications\u003c\/h2\u003e\n\u003cp\u003eShaft thread repair during bearing replacement, spindle rebuild and field service, especially after a nut has been driven with a hammer and drift.\u003c\/p\u003e\n\u003ch2\u003eRelated Whittet-Higgins Series\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\u003ca href=\"\/collections\/n-series-locknut-sae\"\u003eN \/ AN Series Bearing Locknuts – Inch, SAE\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"\/collections\/km-series\"\u003eKM Series Bearing Locknuts – ISO Metric\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"\/collections\/whittet-higgins-bas-bearing-locknut-sockets\"\u003eBAS Series Bearing Assembly Sockets – Inch\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"\/collections\/ne-series-locknut-inch-11-tpi-specification\"\u003eNE Series Bearing Locknuts – Inch, 11 TPI\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eApollo is an authorized Whittet-Higgins distributor. Every part on this page is genuine Whittet-Higgins, manufactured in the USA. Need a size that is not listed, or help matching a locknut to its lockwasher and assembly socket? \u003ca href=\"\/pages\/contact\"\u003eContact our team\u003c\/a\u003e.\u003c\/p\u003e","products":[{"product_id":"whittet-higgins-rtd-00","title":"Whittet Higgins RTD-00 Rethreading Die","description":"\u003cp\u003eThe Whittet-Higgins RTD-series rethreading die is an inch-size threaded shaft repair tool used to clean, repair, and reform damaged external shaft threads. Its ground threads precisely re-cut and restore minor thread deformations while removing old anaerobic locking compounds and particulate buildup from the threaded surface.\u003c\/p\u003e\u003cp\u003eThe die body is machined with a hexagonal profile so it can be turned with readily available shop wrenches, including adjustable, chain, and strap wrenches. Made from case-hardened carbon steel for durability, each die conforms to the thread specifications delineated in ANSI\/ABMA 8.2-1999.\u003c\/p\u003e\u003cp\u003eRated for a maximum operating temperature of 300 degrees F, the RTD die is manufactured in the USA and is RoHS compliant. It is offered in a wide range of sizes to suit specific shaft repair requirements.\u003c\/p\u003e","brand":"Whittet-Higgins","offers":[{"title":"Default Title","offer_id":46304097468566,"sku":null,"price":137.05,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0305\/1241\/4779\/files\/RTDM-side1.png?v=1774569744"},{"product_id":"whittet-higgins-rtd-01","title":"Whittet Higgins RTD-01 Rethreading Die","description":"\u003cp\u003eThe Whittet-Higgins RTD-series rethreading die is an inch-size threaded shaft repair tool used to clean, repair, and reform damaged external shaft threads. Its ground threads precisely re-cut and restore minor thread deformations while removing old anaerobic locking compounds and particulate buildup from the threaded surface.\u003c\/p\u003e\u003cp\u003eThe die body is machined with a hexagonal profile so it can be turned with readily available shop wrenches, including adjustable, chain, and strap wrenches. Made from case-hardened carbon steel for durability, each die conforms to the thread specifications delineated in ANSI\/ABMA 8.2-1999.\u003c\/p\u003e\u003cp\u003eRated for a maximum operating temperature of 300 degrees F, the RTD die is manufactured in the USA and is RoHS compliant. It is offered in a wide range of sizes to suit specific shaft repair requirements.\u003c\/p\u003e","brand":"Whittet-Higgins","offers":[{"title":"Default Title","offer_id":46304097501334,"sku":null,"price":136.25,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0305\/1241\/4779\/files\/RTDM-side1.png?v=1774569744"},{"product_id":"whittet-higgins-rtd-02","title":"Whittet Higgins RTD-02 Rethreading Die","description":"\u003cp\u003eThe Whittet-Higgins RTD-series rethreading die is an inch-size threaded shaft repair tool used to clean, repair, and reform damaged external shaft threads. Its ground threads precisely re-cut and restore minor thread deformations while removing old anaerobic locking compounds and particulate buildup from the threaded surface.\u003c\/p\u003e\u003cp\u003eThe die body is machined with a hexagonal profile so it can be turned with readily available shop wrenches, including adjustable, chain, and strap wrenches. Made from case-hardened carbon steel for durability, each die conforms to the thread specifications delineated in ANSI\/ABMA 8.2-1999.\u003c\/p\u003e\u003cp\u003eRated for a maximum operating temperature of 300 degrees F, the RTD die is manufactured in the USA and is RoHS compliant. It is offered in a wide range of sizes to suit specific shaft repair requirements.\u003c\/p\u003e","brand":"Whittet-Higgins","offers":[{"title":"Default Title","offer_id":46304097534102,"sku":null,"price":114.31,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0305\/1241\/4779\/files\/RTDM-side1.png?v=1774569744"},{"product_id":"whittet-higgins-rtd-03","title":"Whittet Higgins RTD-03 Rethreading Die","description":"\u003cp\u003eThe Whittet-Higgins RTD-series rethreading die is an inch-size threaded shaft repair tool used to clean, repair, and reform damaged external shaft threads. Its ground threads precisely re-cut and restore minor thread deformations while removing old anaerobic locking compounds and particulate buildup from the threaded surface.\u003c\/p\u003e\u003cp\u003eThe die body is machined with a hexagonal profile so it can be turned with readily available shop wrenches, including adjustable, chain, and strap wrenches. Made from case-hardened carbon steel for durability, each die conforms to the thread specifications delineated in ANSI\/ABMA 8.2-1999.\u003c\/p\u003e\u003cp\u003eRated for a maximum operating temperature of 300 degrees F, the RTD die is manufactured in the USA and is RoHS compliant. It is offered in a wide range of sizes to suit specific shaft repair requirements.\u003c\/p\u003e","brand":"Whittet-Higgins","offers":[{"title":"Default Title","offer_id":46304097599638,"sku":null,"price":119.61,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0305\/1241\/4779\/files\/RTDM-side1.png?v=1774569744"},{"product_id":"whittet-higgins-rtd-04","title":"Whittet Higgins RTD-04 Rethreading Die","description":"\u003cp\u003eThe Whittet-Higgins RTD-series rethreading die is an inch-size threaded shaft repair tool used to clean, repair, and reform damaged external shaft threads. Its ground threads precisely re-cut and restore minor thread deformations while removing old anaerobic locking compounds and particulate buildup from the threaded surface.\u003c\/p\u003e\u003cp\u003eThe die body is machined with a hexagonal profile so it can be turned with readily available shop wrenches, including adjustable, chain, and strap wrenches. Made from case-hardened carbon steel for durability, each die conforms to the thread specifications delineated in ANSI\/ABMA 8.2-1999.\u003c\/p\u003e\u003cp\u003eRated for a maximum operating temperature of 300 degrees F, the RTD die is manufactured in the USA and is RoHS compliant. It is offered in a wide range of sizes to suit specific shaft repair requirements.\u003c\/p\u003e","brand":"Whittet-Higgins","offers":[{"title":"Default Title","offer_id":46304097632406,"sku":null,"price":122.25,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0305\/1241\/4779\/files\/RTDM-side1.png?v=1774569744"},{"product_id":"whittet-higgins-rtd-05","title":"Whittet Higgins RTD-05 Rethreading Die","description":"\u003cp\u003eThe Whittet-Higgins RTD-series rethreading die is an inch-size threaded shaft repair tool used to clean, repair, and reform damaged external shaft threads. Its ground threads precisely re-cut and restore minor thread deformations while removing old anaerobic locking compounds and particulate buildup from the threaded surface.\u003c\/p\u003e\u003cp\u003eThe die body is machined with a hexagonal profile so it can be turned with readily available shop wrenches, including adjustable, chain, and strap wrenches. Made from case-hardened carbon steel for durability, each die conforms to the thread specifications delineated in ANSI\/ABMA 8.2-1999.\u003c\/p\u003e\u003cp\u003eRated for a maximum operating temperature of 300 degrees F, the RTD die is manufactured in the USA and is RoHS compliant. It is offered in a wide range of sizes to suit specific shaft repair requirements.\u003c\/p\u003e","brand":"Whittet-Higgins","offers":[{"title":"Default Title","offer_id":46304097665174,"sku":null,"price":159.49,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0305\/1241\/4779\/files\/RTDM-side1.png?v=1774569744"},{"product_id":"whittet-higgins-rtd-06","title":"Whittet Higgins RTD-06 Rethreading Die","description":"\u003cp\u003eThe Whittet-Higgins RTD-series rethreading die is an inch-size threaded shaft repair tool used to clean, repair, and reform damaged external shaft threads. Its ground threads precisely re-cut and restore minor thread deformations while removing old anaerobic locking compounds and particulate buildup from the threaded surface.\u003c\/p\u003e\u003cp\u003eThe die body is machined with a hexagonal profile so it can be turned with readily available shop wrenches, including adjustable, chain, and strap wrenches. Made from case-hardened carbon steel for durability, each die conforms to the thread specifications delineated in ANSI\/ABMA 8.2-1999.\u003c\/p\u003e\u003cp\u003eRated for a maximum operating temperature of 300 degrees F, the RTD die is manufactured in the USA and is RoHS compliant. It is offered in a wide range of sizes to suit specific shaft repair requirements.\u003c\/p\u003e","brand":"Whittet-Higgins","offers":[{"title":"Default Title","offer_id":46304097697942,"sku":null,"price":182.73,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0305\/1241\/4779\/files\/RTDM-side1.png?v=1774569744"},{"product_id":"whittet-higgins-rtd-065","title":"Whittet Higgins RTD-065 Rethreading Die","description":"\u003cp\u003eThe Whittet-Higgins RTD-series rethreading die is an inch-size threaded shaft repair tool used to clean, repair, and reform damaged external shaft threads. Its ground threads precisely re-cut and restore minor thread deformations while removing old anaerobic locking compounds and particulate buildup from the threaded surface.\u003c\/p\u003e\u003cp\u003eThe die body is machined with a hexagonal profile so it can be turned with readily available shop wrenches, including adjustable, chain, and strap wrenches. Made from case-hardened carbon steel for durability, each die conforms to the thread specifications delineated in ANSI\/ABMA 8.2-1999.\u003c\/p\u003e\u003cp\u003eRated for a maximum operating temperature of 300 degrees F, the RTD die is manufactured in the USA and is RoHS compliant. It is offered in a wide range of sizes to suit specific shaft repair requirements.\u003c\/p\u003e","brand":"Whittet-Higgins","offers":[{"title":"Default Title","offer_id":46304097730710,"sku":null,"price":219.66,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0305\/1241\/4779\/files\/RTDM-side1.png?v=1774569744"},{"product_id":"whittet-higgins-rtd-07","title":"Whittet Higgins RTD-07 Rethreading Die","description":"\u003cp\u003eThe Whittet-Higgins RTD-series rethreading die is an inch-size threaded shaft repair tool used to clean, repair, and reform damaged external shaft threads. Its ground threads precisely re-cut and restore minor thread deformations while removing old anaerobic locking compounds and particulate buildup from the threaded surface.\u003c\/p\u003e\u003cp\u003eThe die body is machined with a hexagonal profile so it can be turned with readily available shop wrenches, including adjustable, chain, and strap wrenches. Made from case-hardened carbon steel for durability, each die conforms to the thread specifications delineated in ANSI\/ABMA 8.2-1999.\u003c\/p\u003e\u003cp\u003eRated for a maximum operating temperature of 300 degrees F, the RTD die is manufactured in the USA and is RoHS compliant. It is offered in a wide range of sizes to suit specific shaft repair requirements.\u003c\/p\u003e","brand":"Whittet-Higgins","offers":[{"title":"Default Title","offer_id":46304097763478,"sku":null,"price":191.45,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0305\/1241\/4779\/files\/RTDM-side1.png?v=1774569744"},{"product_id":"whittet-higgins-rtd-08","title":"Whittet Higgins RTD-08 Rethreading Die","description":"\u003cp\u003eThe Whittet-Higgins RTD-series rethreading die is an inch-size threaded shaft repair tool used to clean, repair, and reform damaged external shaft threads. Its ground threads precisely re-cut and restore minor thread deformations while removing old anaerobic locking compounds and particulate buildup from the threaded surface.\u003c\/p\u003e\u003cp\u003eThe die body is machined with a hexagonal profile so it can be turned with readily available shop wrenches, including adjustable, chain, and strap wrenches. Made from case-hardened carbon steel for durability, each die conforms to the thread specifications delineated in ANSI\/ABMA 8.2-1999.\u003c\/p\u003e\u003cp\u003eRated for a maximum operating temperature of 300 degrees F, the RTD die is manufactured in the USA and is RoHS compliant. It is offered in a wide range of sizes to suit specific shaft repair requirements.\u003c\/p\u003e","brand":"Whittet-Higgins","offers":[{"title":"Default Title","offer_id":46304097796246,"sku":null,"price":276.52,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0305\/1241\/4779\/files\/RTDM-side1.png?v=1774569744"},{"product_id":"whittet-higgins-rtd-09","title":"Whittet Higgins RTD-09 Rethreading Die","description":"\u003cp\u003eThe Whittet-Higgins RTD-series rethreading die is an inch-size threaded shaft repair tool used to clean, repair, and reform damaged external shaft threads. Its ground threads precisely re-cut and restore minor thread deformations while removing old anaerobic locking compounds and particulate buildup from the threaded surface.\u003c\/p\u003e\u003cp\u003eThe die body is machined with a hexagonal profile so it can be turned with readily available shop wrenches, including adjustable, chain, and strap wrenches. Made from case-hardened carbon steel for durability, each die conforms to the thread specifications delineated in ANSI\/ABMA 8.2-1999.\u003c\/p\u003e\u003cp\u003eRated for a maximum operating temperature of 300 degrees F, the RTD die is manufactured in the USA and is RoHS compliant. It is offered in a wide range of sizes to suit specific shaft repair requirements.\u003c\/p\u003e","brand":"Whittet-Higgins","offers":[{"title":"Default Title","offer_id":46304097829014,"sku":null,"price":292.42,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0305\/1241\/4779\/files\/RTDM-side1.png?v=1774569744"},{"product_id":"whittet-higgins-rtd-10","title":"Whittet Higgins RTD-10 Rethreading Die","description":"\u003cp\u003eThe Whittet-Higgins RTD-series rethreading die is an inch-size threaded shaft repair tool used to clean, repair, and reform damaged external shaft threads. Its ground threads precisely re-cut and restore minor thread deformations while removing old anaerobic locking compounds and particulate buildup from the threaded surface.\u003c\/p\u003e\u003cp\u003eThe die body is machined with a hexagonal profile so it can be turned with readily available shop wrenches, including adjustable, chain, and strap wrenches. Made from case-hardened carbon steel for durability, each die conforms to the thread specifications delineated in ANSI\/ABMA 8.2-1999.\u003c\/p\u003e\u003cp\u003eRated for a maximum operating temperature of 300 degrees F, the RTD die is manufactured in the USA and is RoHS compliant. It is offered in a wide range of sizes to suit specific shaft repair requirements.\u003c\/p\u003e","brand":"Whittet-Higgins","offers":[{"title":"Default Title","offer_id":46304097861782,"sku":null,"price":416.41,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0305\/1241\/4779\/files\/RTDM-side1.png?v=1774569744"},{"product_id":"whittet-higgins-rtd-11","title":"Whittet Higgins RTD-11 Rethreading Die","description":"\u003cp\u003eThe Whittet-Higgins RTD-series rethreading die is an inch-size threaded shaft repair tool used to clean, repair, and reform damaged external shaft threads. Its ground threads precisely re-cut and restore minor thread deformations while removing old anaerobic locking compounds and particulate buildup from the threaded surface.\u003c\/p\u003e\u003cp\u003eThe die body is machined with a hexagonal profile so it can be turned with readily available shop wrenches, including adjustable, chain, and strap wrenches. Made from case-hardened carbon steel for durability, each die conforms to the thread specifications delineated in ANSI\/ABMA 8.2-1999.\u003c\/p\u003e\u003cp\u003eRated for a maximum operating temperature of 300 degrees F, the RTD die is manufactured in the USA and is RoHS compliant. It is offered in a wide range of sizes to suit specific shaft repair requirements.\u003c\/p\u003e","brand":"Whittet-Higgins","offers":[{"title":"Default Title","offer_id":46304097927318,"sku":null,"price":439.48,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0305\/1241\/4779\/files\/RTDM-side1.png?v=1774569744"},{"product_id":"whittet-higgins-rtd-12","title":"Whittet Higgins RTD-12 Rethreading Die","description":"\u003cp\u003eThe Whittet-Higgins RTD-series rethreading die is an inch-size threaded shaft repair tool used to clean, repair, and reform damaged external shaft threads. Its ground threads precisely re-cut and restore minor thread deformations while removing old anaerobic locking compounds and particulate buildup from the threaded surface.\u003c\/p\u003e\u003cp\u003eThe die body is machined with a hexagonal profile so it can be turned with readily available shop wrenches, including adjustable, chain, and strap wrenches. Made from case-hardened carbon steel for durability, each die conforms to the thread specifications delineated in ANSI\/ABMA 8.2-1999.\u003c\/p\u003e\u003cp\u003eRated for a maximum operating temperature of 300 degrees F, the RTD die is manufactured in the USA and is RoHS compliant. It is offered in a wide range of sizes to suit specific shaft repair requirements.\u003c\/p\u003e","brand":"Whittet-Higgins","offers":[{"title":"Default Title","offer_id":46304097960086,"sku":null,"price":531.62,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0305\/1241\/4779\/files\/RTDM-side1.png?v=1774569744"},{"product_id":"whittet-higgins-rtd-13","title":"Whittet Higgins RTD-13 Rethreading Die","description":"\u003cp\u003eThe Whittet-Higgins RTD-series rethreading die is an inch-size threaded shaft repair tool used to clean, repair, and reform damaged external shaft threads. Its ground threads precisely re-cut and restore minor thread deformations while removing old anaerobic locking compounds and particulate buildup from the threaded surface.\u003c\/p\u003e\u003cp\u003eThe die body is machined with a hexagonal profile so it can be turned with readily available shop wrenches, including adjustable, chain, and strap wrenches. Made from case-hardened carbon steel for durability, each die conforms to the thread specifications delineated in ANSI\/ABMA 8.2-1999.\u003c\/p\u003e\u003cp\u003eRated for a maximum operating temperature of 300 degrees F, the RTD die is manufactured in the USA and is RoHS compliant. It is offered in a wide range of sizes to suit specific shaft repair requirements.\u003c\/p\u003e","brand":"Whittet-Higgins","offers":[{"title":"Default Title","offer_id":46304097992854,"sku":null,"price":588.12,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0305\/1241\/4779\/files\/RTDM-side1.png?v=1774569744"},{"product_id":"whittet-higgins-rtd-14","title":"Whittet Higgins RTD-14 Rethreading Die","description":"\u003cp\u003eThe Whittet-Higgins RTD-series rethreading die is an inch-size threaded shaft repair tool used to clean, repair, and reform damaged external shaft threads. Its ground threads precisely re-cut and restore minor thread deformations while removing old anaerobic locking compounds and particulate buildup from the threaded surface.\u003c\/p\u003e\u003cp\u003eThe die body is machined with a hexagonal profile so it can be turned with readily available shop wrenches, including adjustable, chain, and strap wrenches. Made from case-hardened carbon steel for durability, each die conforms to the thread specifications delineated in ANSI\/ABMA 8.2-1999.\u003c\/p\u003e\u003cp\u003eRated for a maximum operating temperature of 300 degrees F, the RTD die is manufactured in the USA and is RoHS compliant. It is offered in a wide range of sizes to suit specific shaft repair requirements.\u003c\/p\u003e","brand":"Whittet-Higgins","offers":[{"title":"Default Title","offer_id":46304098058390,"sku":null,"price":629.73,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0305\/1241\/4779\/files\/RTDM-side1.png?v=1774569744"},{"product_id":"whittet-higgins-rtd-15","title":"Whittet Higgins RTD-15 Rethreading Die","description":"\u003cp\u003eThe Whittet-Higgins RTD-series rethreading die is an inch-size threaded shaft repair tool used to clean, repair, and reform damaged external shaft threads. Its ground threads precisely re-cut and restore minor thread deformations while removing old anaerobic locking compounds and particulate buildup from the threaded surface.\u003c\/p\u003e\u003cp\u003eThe die body is machined with a hexagonal profile so it can be turned with readily available shop wrenches, including adjustable, chain, and strap wrenches. Made from case-hardened carbon steel for durability, each die conforms to the thread specifications delineated in ANSI\/ABMA 8.2-1999.\u003c\/p\u003e\u003cp\u003eRated for a maximum operating temperature of 300 degrees F, the RTD die is manufactured in the USA and is RoHS compliant. It is offered in a wide range of sizes to suit specific shaft repair requirements.\u003c\/p\u003e","brand":"Whittet-Higgins","offers":[{"title":"Default Title","offer_id":46304098091158,"sku":null,"price":648.83,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0305\/1241\/4779\/files\/RTDM-side1.png?v=1774569744"},{"product_id":"whittet-higgins-rtd-16","title":"Whittet Higgins RTD-16 Rethreading Die","description":"\u003cp\u003eThe Whittet-Higgins RTD-series rethreading die is an inch-size threaded shaft repair tool used to clean, repair, and reform damaged external shaft threads. Its ground threads precisely re-cut and restore minor thread deformations while removing old anaerobic locking compounds and particulate buildup from the threaded surface.\u003c\/p\u003e\u003cp\u003eThe die body is machined with a hexagonal profile so it can be turned with readily available shop wrenches, including adjustable, chain, and strap wrenches. Made from case-hardened carbon steel for durability, each die conforms to the thread specifications delineated in ANSI\/ABMA 8.2-1999.\u003c\/p\u003e\u003cp\u003eRated for a maximum operating temperature of 300 degrees F, the RTD die is manufactured in the USA and is RoHS compliant. It is offered in a wide range of sizes to suit specific shaft repair requirements.\u003c\/p\u003e","brand":"Whittet-Higgins","offers":[{"title":"Default Title","offer_id":46304098123926,"sku":null,"price":696.43,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0305\/1241\/4779\/files\/RTDM-side1.png?v=1774569744"},{"product_id":"whittet-higgins-rtd-17","title":"Whittet Higgins RTD-17 Rethreading Die","description":"\u003cp\u003eThe Whittet-Higgins RTD-series rethreading die is an inch-size threaded shaft repair tool used to clean, repair, and reform damaged external shaft threads. Its ground threads precisely re-cut and restore minor thread deformations while removing old anaerobic locking compounds and particulate buildup from the threaded surface.\u003c\/p\u003e\u003cp\u003eThe die body is machined with a hexagonal profile so it can be turned with readily available shop wrenches, including adjustable, chain, and strap wrenches. Made from case-hardened carbon steel for durability, each die conforms to the thread specifications delineated in ANSI\/ABMA 8.2-1999.\u003c\/p\u003e\u003cp\u003eRated for a maximum operating temperature of 300 degrees F, the RTD die is manufactured in the USA and is RoHS compliant. It is offered in a wide range of sizes to suit specific shaft repair requirements.\u003c\/p\u003e","brand":"Whittet-Higgins","offers":[{"title":"Default Title","offer_id":46304098156694,"sku":null,"price":841.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0305\/1241\/4779\/files\/RTDM-side1.png?v=1774569744"},{"product_id":"whittet-higgins-rtd-18","title":"Whittet Higgins RTD-18 Rethreading Die","description":"\u003cp\u003eThe Whittet-Higgins RTD-series rethreading die is an inch-size threaded shaft repair tool used to clean, repair, and reform damaged external shaft threads. Its ground threads precisely re-cut and restore minor thread deformations while removing old anaerobic locking compounds and particulate buildup from the threaded surface.\u003c\/p\u003e\u003cp\u003eThe die body is machined with a hexagonal profile so it can be turned with readily available shop wrenches, including adjustable, chain, and strap wrenches. Made from case-hardened carbon steel for durability, each die conforms to the thread specifications delineated in ANSI\/ABMA 8.2-1999.\u003c\/p\u003e\u003cp\u003eRated for a maximum operating temperature of 300 degrees F, the RTD die is manufactured in the USA and is RoHS compliant. It is offered in a wide range of sizes to suit specific shaft repair requirements.\u003c\/p\u003e","brand":"Whittet-Higgins","offers":[{"title":"Default Title","offer_id":46304098189462,"sku":null,"price":996.13,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0305\/1241\/4779\/files\/RTDM-side1.png?v=1774569744"},{"product_id":"whittet-higgins-rtd-19","title":"Whittet Higgins RTD-19 Rethreading Die","description":"\u003cp\u003eThe Whittet-Higgins RTD-series rethreading die is an inch-size threaded shaft repair tool used to clean, repair, and reform damaged external shaft threads. Its ground threads precisely re-cut and restore minor thread deformations while removing old anaerobic locking compounds and particulate buildup from the threaded surface.\u003c\/p\u003e\u003cp\u003eThe die body is machined with a hexagonal profile so it can be turned with readily available shop wrenches, including adjustable, chain, and strap wrenches. Made from case-hardened carbon steel for durability, each die conforms to the thread specifications delineated in ANSI\/ABMA 8.2-1999.\u003c\/p\u003e\u003cp\u003eRated for a maximum operating temperature of 300 degrees F, the RTD die is manufactured in the USA and is RoHS compliant. It is offered in a wide range of sizes to suit specific shaft repair requirements.\u003c\/p\u003e","brand":"Whittet-Higgins","offers":[{"title":"Default Title","offer_id":46304098254998,"sku":null,"price":1077.15,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0305\/1241\/4779\/files\/RTDM-side1.png?v=1774569744"},{"product_id":"whittet-higgins-rtd-20","title":"Whittet Higgins RTD-20 Rethreading Die","description":"\u003cp\u003eThe Whittet-Higgins RTD-series rethreading die is an inch-size threaded shaft repair tool used to clean, repair, and reform damaged external shaft threads. Its ground threads precisely re-cut and restore minor thread deformations while removing old anaerobic locking compounds and particulate buildup from the threaded surface.\u003c\/p\u003e\u003cp\u003eThe die body is machined with a hexagonal profile so it can be turned with readily available shop wrenches, including adjustable, chain, and strap wrenches. Made from case-hardened carbon steel for durability, each die conforms to the thread specifications delineated in ANSI\/ABMA 8.2-1999.\u003c\/p\u003e\u003cp\u003eRated for a maximum operating temperature of 300 degrees F, the RTD die is manufactured in the USA and is RoHS compliant. It is offered in a wide range of sizes to suit specific shaft repair requirements.\u003c\/p\u003e","brand":"Whittet-Higgins","offers":[{"title":"Default Title","offer_id":46304098287766,"sku":null,"price":1105.11,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0305\/1241\/4779\/files\/RTDM-side1.png?v=1774569744"},{"product_id":"whittet-higgins-rtd-21","title":"Whittet Higgins RTD-21 Rethreading Die","description":"\u003cp\u003eThe Whittet-Higgins RTD-series rethreading die is an inch-size threaded shaft repair tool used to clean, repair, and reform damaged external shaft threads. Its ground threads precisely re-cut and restore minor thread deformations while removing old anaerobic locking compounds and particulate buildup from the threaded surface.\u003c\/p\u003e\u003cp\u003eThe die body is machined with a hexagonal profile so it can be turned with readily available shop wrenches, including adjustable, chain, and strap wrenches. Made from case-hardened carbon steel for durability, each die conforms to the thread specifications delineated in ANSI\/ABMA 8.2-1999.\u003c\/p\u003e\u003cp\u003eRated for a maximum operating temperature of 300 degrees F, the RTD die is manufactured in the USA and is RoHS compliant. It is offered in a wide range of sizes to suit specific shaft repair requirements.\u003c\/p\u003e","brand":"Whittet-Higgins","offers":[{"title":"Default Title","offer_id":46304098320534,"sku":null,"price":1221.82,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0305\/1241\/4779\/files\/RTDM-side1.png?v=1774569744"},{"product_id":"whittet-higgins-rtd-22","title":"Whittet Higgins RTD-22 Rethreading Die","description":"\u003cp\u003eThe Whittet-Higgins RTD-series rethreading die is an inch-size threaded shaft repair tool used to clean, repair, and reform damaged external shaft threads. Its ground threads precisely re-cut and restore minor thread deformations while removing old anaerobic locking compounds and particulate buildup from the threaded surface.\u003c\/p\u003e\u003cp\u003eThe die body is machined with a hexagonal profile so it can be turned with readily available shop wrenches, including adjustable, chain, and strap wrenches. Made from case-hardened carbon steel for durability, each die conforms to the thread specifications delineated in ANSI\/ABMA 8.2-1999.\u003c\/p\u003e\u003cp\u003eRated for a maximum operating temperature of 300 degrees F, the RTD die is manufactured in the USA and is RoHS compliant. It is offered in a wide range of sizes to suit specific shaft repair requirements.\u003c\/p\u003e","brand":"Whittet-Higgins","offers":[{"title":"Default Title","offer_id":46304098353302,"sku":null,"price":1123.06,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0305\/1241\/4779\/files\/RTDM-side1.png?v=1774569744"},{"product_id":"whittet-higgins-rtd-24","title":"Whittet Higgins RTD-24 Rethreading Die","description":"\u003cp\u003eThe Whittet-Higgins RTD-series rethreading die is an inch-size threaded shaft repair tool used to clean, repair, and reform damaged external shaft threads. Its ground threads precisely re-cut and restore minor thread deformations while removing old anaerobic locking compounds and particulate buildup from the threaded surface.\u003c\/p\u003e\u003cp\u003eThe die body is machined with a hexagonal profile so it can be turned with readily available shop wrenches, including adjustable, chain, and strap wrenches. Made from case-hardened carbon steel for durability, each die conforms to the thread specifications delineated in ANSI\/ABMA 8.2-1999.\u003c\/p\u003e\u003cp\u003eRated for a maximum operating temperature of 300 degrees F, the RTD die is manufactured in the USA and is RoHS compliant. It is offered in a wide range of sizes to suit specific shaft repair requirements.\u003c\/p\u003e","brand":"Whittet-Higgins","offers":[{"title":"Default Title","offer_id":46304098386070,"sku":null,"price":1516.62,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0305\/1241\/4779\/files\/RTDM-side1.png?v=1774569744"},{"product_id":"whittet-higgins-rtd-26","title":"Whittet Higgins RTD-26 Rethreading Die","description":"\u003cp\u003eThe Whittet-Higgins RTD-series rethreading die is an inch-size threaded shaft repair tool used to clean, repair, and reform damaged external shaft threads. Its ground threads precisely re-cut and restore minor thread deformations while removing old anaerobic locking compounds and particulate buildup from the threaded surface.\u003c\/p\u003e\u003cp\u003eThe die body is machined with a hexagonal profile so it can be turned with readily available shop wrenches, including adjustable, chain, and strap wrenches. Made from case-hardened carbon steel for durability, each die conforms to the thread specifications delineated in ANSI\/ABMA 8.2-1999.\u003c\/p\u003e\u003cp\u003eRated for a maximum operating temperature of 300 degrees F, the RTD die is manufactured in the USA and is RoHS compliant. It is offered in a wide range of sizes to suit specific shaft repair requirements.\u003c\/p\u003e","brand":"Whittet-Higgins","offers":[{"title":"Default Title","offer_id":46304098418838,"sku":null,"price":1855.56,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0305\/1241\/4779\/files\/RTDM-side1.png?v=1774569744"},{"product_id":"whittet-higgins-rtd-28","title":"Whittet Higgins RTD-28 Rethreading Die","description":"\u003cp\u003eThe Whittet-Higgins RTD-series rethreading die is an inch-size threaded shaft repair tool used to clean, repair, and reform damaged external shaft threads. Its ground threads precisely re-cut and restore minor thread deformations while removing old anaerobic locking compounds and particulate buildup from the threaded surface.\u003c\/p\u003e\u003cp\u003eThe die body is machined with a hexagonal profile so it can be turned with readily available shop wrenches, including adjustable, chain, and strap wrenches. Made from case-hardened carbon steel for durability, each die conforms to the thread specifications delineated in ANSI\/ABMA 8.2-1999.\u003c\/p\u003e\u003cp\u003eRated for a maximum operating temperature of 300 degrees F, the RTD die is manufactured in the USA and is RoHS compliant. It is offered in a wide range of sizes to suit specific shaft repair requirements.\u003c\/p\u003e","brand":"Whittet-Higgins","offers":[{"title":"Default Title","offer_id":46304098451606,"sku":null,"price":1933.78,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0305\/1241\/4779\/files\/RTDM-side1.png?v=1774569744"},{"product_id":"whittet-higgins-rtd-30","title":"Whittet Higgins RTD-30 Rethreading Die","description":"\u003cp\u003eThe Whittet-Higgins RTD-series rethreading die is an inch-size threaded shaft repair tool used to clean, repair, and reform damaged external shaft threads. Its ground threads precisely re-cut and restore minor thread deformations while removing old anaerobic locking compounds and particulate buildup from the threaded surface.\u003c\/p\u003e\u003cp\u003eThe die body is machined with a hexagonal profile so it can be turned with readily available shop wrenches, including adjustable, chain, and strap wrenches. Made from case-hardened carbon steel for durability, each die conforms to the thread specifications delineated in ANSI\/ABMA 8.2-1999.\u003c\/p\u003e\u003cp\u003eRated for a maximum operating temperature of 300 degrees F, the RTD die is manufactured in the USA and is RoHS compliant. It is offered in a wide range of sizes to suit specific shaft repair requirements.\u003c\/p\u003e","brand":"Whittet-Higgins","offers":[{"title":"Default Title","offer_id":46304098484374,"sku":null,"price":2057.6,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0305\/1241\/4779\/files\/RTDM-side1.png?v=1774569744"},{"product_id":"whittet-higgins-rtd-32","title":"Whittet Higgins RTD-32 Rethreading Die","description":"\u003cp\u003eThe Whittet-Higgins RTD-series rethreading die is an inch-size threaded shaft repair tool used to clean, repair, and reform damaged external shaft threads. Its ground threads precisely re-cut and restore minor thread deformations while removing old anaerobic locking compounds and particulate buildup from the threaded surface.\u003c\/p\u003e\u003cp\u003eThe die body is machined with a hexagonal profile so it can be turned with readily available shop wrenches, including adjustable, chain, and strap wrenches. Made from case-hardened carbon steel for durability, each die conforms to the thread specifications delineated in ANSI\/ABMA 8.2-1999.\u003c\/p\u003e\u003cp\u003eRated for a maximum operating temperature of 300 degrees F, the RTD die is manufactured in the USA and is RoHS compliant. It is offered in a wide range of sizes to suit specific shaft repair requirements.\u003c\/p\u003e","brand":"Whittet-Higgins","offers":[{"title":"Default Title","offer_id":46304098517142,"sku":null,"price":2227.66,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0305\/1241\/4779\/files\/RTDM-side1.png?v=1774569744"},{"product_id":"whittet-higgins-rtd-34","title":"Whittet Higgins RTD-34 Rethreading Die","description":"\u003cp\u003eThe Whittet-Higgins RTD-series rethreading die is an inch-size threaded shaft repair tool used to clean, repair, and reform damaged external shaft threads. Its ground threads precisely re-cut and restore minor thread deformations while removing old anaerobic locking compounds and particulate buildup from the threaded surface.\u003c\/p\u003e\u003cp\u003eThe die body is machined with a hexagonal profile so it can be turned with readily available shop wrenches, including adjustable, chain, and strap wrenches. Made from case-hardened carbon steel for durability, each die conforms to the thread specifications delineated in ANSI\/ABMA 8.2-1999.\u003c\/p\u003e\u003cp\u003eRated for a maximum operating temperature of 300 degrees F, the RTD die is manufactured in the USA and is RoHS compliant. It is offered in a wide range of sizes to suit specific shaft repair requirements.\u003c\/p\u003e","brand":"Whittet-Higgins","offers":[{"title":"Default Title","offer_id":46304098549910,"sku":null,"price":2442.93,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0305\/1241\/4779\/files\/RTDM-side1.png?v=1774569744"},{"product_id":"whittet-higgins-rtd-36","title":"Whittet Higgins RTD-36 Rethreading Die","description":"\u003cp\u003eThe Whittet-Higgins RTD-series rethreading die is an inch-size threaded shaft repair tool used to clean, repair, and reform damaged external shaft threads. Its ground threads precisely re-cut and restore minor thread deformations while removing old anaerobic locking compounds and particulate buildup from the threaded surface.\u003c\/p\u003e\u003cp\u003eThe die body is machined with a hexagonal profile so it can be turned with readily available shop wrenches, including adjustable, chain, and strap wrenches. Made from case-hardened carbon steel for durability, each die conforms to the thread specifications delineated in ANSI\/ABMA 8.2-1999.\u003c\/p\u003e\u003cp\u003eRated for a maximum operating temperature of 300 degrees F, the RTD die is manufactured in the USA and is RoHS compliant. It is offered in a wide range of sizes to suit specific shaft repair requirements.\u003c\/p\u003e","brand":"Whittet-Higgins","offers":[{"title":"Default Title","offer_id":46304098582678,"sku":null,"price":2861.75,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0305\/1241\/4779\/files\/RTDM-side1.png?v=1774569744"},{"product_id":"whittet-higgins-rtd-38","title":"Whittet Higgins RTD-38 Rethreading Die","description":"\u003cp\u003eThe Whittet-Higgins RTD-series rethreading die is an inch-size threaded shaft repair tool used to clean, repair, and reform damaged external shaft threads. Its ground threads precisely re-cut and restore minor thread deformations while removing old anaerobic locking compounds and particulate buildup from the threaded surface.\u003c\/p\u003e\u003cp\u003eThe die body is machined with a hexagonal profile so it can be turned with readily available shop wrenches, including adjustable, chain, and strap wrenches. Made from case-hardened carbon steel for durability, each die conforms to the thread specifications delineated in ANSI\/ABMA 8.2-1999.\u003c\/p\u003e\u003cp\u003eRated for a maximum operating temperature of 300 degrees F, the RTD die is manufactured in the USA and is RoHS compliant. It is offered in a wide range of sizes to suit specific shaft repair requirements.\u003c\/p\u003e","brand":"Whittet-Higgins","offers":[{"title":"Default Title","offer_id":46304098648214,"sku":null,"price":3596.86,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0305\/1241\/4779\/files\/RTDM-side1.png?v=1774569744"},{"product_id":"whittet-higgins-rtd-40","title":"Whittet Higgins RTD-40 Rethreading Die","description":"\u003cp\u003eThe Whittet-Higgins RTD-series rethreading die is an inch-size threaded shaft repair tool used to clean, repair, and reform damaged external shaft threads. Its ground threads precisely re-cut and restore minor thread deformations while removing old anaerobic locking compounds and particulate buildup from the threaded surface.\u003c\/p\u003e\u003cp\u003eThe die body is machined with a hexagonal profile so it can be turned with readily available shop wrenches, including adjustable, chain, and strap wrenches. Made from case-hardened carbon steel for durability, each die conforms to the thread specifications delineated in ANSI\/ABMA 8.2-1999.\u003c\/p\u003e\u003cp\u003eRated for a maximum operating temperature of 300 degrees F, the RTD die is manufactured in the USA and is RoHS compliant. It is offered in a wide range of sizes to suit specific shaft repair requirements.\u003c\/p\u003e","brand":"Whittet-Higgins","offers":[{"title":"Default Title","offer_id":46304098680982,"sku":null,"price":9357.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0305\/1241\/4779\/files\/RTDM-side1.png?v=1774569744"},{"product_id":"whittet-higgins-rtdm-00","title":"Whittet Higgins RTDM-00 Rethreading Die","description":"\u003cp\u003eThe Whittet-Higgins RTDM-00 is a metric rethreading die used to clean, repair, and reform damaged external shaft threads. Its ground threads precisely chase the shaft, efficiently removing old anaerobic locking compounds and particulate while correcting minor thread deformations to restore proper fit.\u003c\/p\u003e\u003cp\u003eThe hexagonal body is driven with readily available shop wrenches (adjustable, chain, strap, etc.), and the die is machined from case-hardened carbon steel. It conforms to the thread specifications delineated in ISO 2982-2:2013(E), is rated for a maximum operating temperature of 300°F, and is manufactured in the USA and RoHS compliant.\u003c\/p\u003e","brand":"Whittet-Higgins","offers":[{"title":"Default Title","offer_id":46304098713750,"sku":null,"price":263.75,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0305\/1241\/4779\/files\/RTDM-side1.png?v=1774569744"},{"product_id":"whittet-higgins-rtdm-01","title":"Whittet Higgins RTDM-01 Rethreading Die","description":"\u003cp\u003eThe Whittet-Higgins RTDM-01 is a metric rethreading die used to clean, repair, and reform damaged external shaft threads. Its ground threads precisely chase the shaft, efficiently removing old anaerobic locking compounds and particulate while correcting minor thread deformations to restore proper fit.\u003c\/p\u003e\u003cp\u003eThe hexagonal body is driven with readily available shop wrenches (adjustable, chain, strap, etc.), and the die is machined from case-hardened carbon steel. It conforms to the thread specifications delineated in ISO 2982-2:2013(E), is rated for a maximum operating temperature of 300°F, and is manufactured in the USA and RoHS compliant.\u003c\/p\u003e","brand":"Whittet-Higgins","offers":[{"title":"Default Title","offer_id":46304098746518,"sku":null,"price":261.88,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0305\/1241\/4779\/files\/RTDM-side1.png?v=1774569744"},{"product_id":"whittet-higgins-rtdm-02","title":"Whittet Higgins RTDM-02 Rethreading Die","description":"\u003cp\u003eThe Whittet-Higgins RTDM-02 is a metric rethreading die used to clean, repair, and reform damaged external shaft threads. Its ground threads precisely chase the shaft, efficiently removing old anaerobic locking compounds and particulate while correcting minor thread deformations to restore proper fit.\u003c\/p\u003e\u003cp\u003eThe hexagonal body is driven with readily available shop wrenches (adjustable, chain, strap, etc.), and the die is machined from case-hardened carbon steel. It conforms to the thread specifications delineated in ISO 2982-2:2013(E), is rated for a maximum operating temperature of 300°F, and is manufactured in the USA and RoHS compliant.\u003c\/p\u003e","brand":"Whittet-Higgins","offers":[{"title":"Default Title","offer_id":46304098779286,"sku":null,"price":277.86,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0305\/1241\/4779\/files\/RTDM-side1.png?v=1774569744"},{"product_id":"whittet-higgins-rtdm-03","title":"Whittet Higgins RTDM-03 Rethreading Die","description":"\u003cp\u003eThe Whittet-Higgins RTDM-03 is a metric rethreading die used to clean, repair, and reform damaged external shaft threads. Its ground threads precisely chase the shaft, efficiently removing old anaerobic locking compounds and particulate while correcting minor thread deformations to restore proper fit.\u003c\/p\u003e\u003cp\u003eThe hexagonal body is driven with readily available shop wrenches (adjustable, chain, strap, etc.), and the die is machined from case-hardened carbon steel. It conforms to the thread specifications delineated in ISO 2982-2:2013(E), is rated for a maximum operating temperature of 300°F, and is manufactured in the USA and RoHS compliant.\u003c\/p\u003e","brand":"Whittet-Higgins","offers":[{"title":"Default Title","offer_id":46304098812054,"sku":null,"price":290.66,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0305\/1241\/4779\/files\/RTDM-side1.png?v=1774569744"},{"product_id":"whittet-higgins-rtdm-04","title":"Whittet Higgins RTDM-04 Rethreading Die","description":"\u003cp\u003eThe Whittet-Higgins RTDM-04 is a metric rethreading die used to clean, repair, and reform damaged external shaft threads. Its ground threads precisely chase the shaft, efficiently removing old anaerobic locking compounds and particulate while correcting minor thread deformations to restore proper fit.\u003c\/p\u003e\u003cp\u003eThe hexagonal body is driven with readily available shop wrenches (adjustable, chain, strap, etc.), and the die is machined from case-hardened carbon steel. It conforms to the thread specifications delineated in ISO 2982-2:2013(E), is rated for a maximum operating temperature of 300°F, and is manufactured in the USA and RoHS compliant.\u003c\/p\u003e","brand":"Whittet-Higgins","offers":[{"title":"Default Title","offer_id":46304098844822,"sku":null,"price":302.64,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0305\/1241\/4779\/files\/RTDM-side1.png?v=1774569744"},{"product_id":"whittet-higgins-rtdm-05","title":"Whittet Higgins RTDM-05 Rethreading Die","description":"\u003cp\u003eThe Whittet-Higgins RTDM-05 is a metric rethreading die used to clean, repair, and reform damaged external shaft threads. Its ground threads precisely chase the shaft, efficiently removing old anaerobic locking compounds and particulate while correcting minor thread deformations to restore proper fit.\u003c\/p\u003e\u003cp\u003eThe hexagonal body is driven with readily available shop wrenches (adjustable, chain, strap, etc.), and the die is machined from case-hardened carbon steel. It conforms to the thread specifications delineated in ISO 2982-2:2013(E), is rated for a maximum operating temperature of 300°F, and is manufactured in the USA and RoHS compliant.\u003c\/p\u003e","brand":"Whittet-Higgins","offers":[{"title":"Default Title","offer_id":46304098910358,"sku":null,"price":310.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0305\/1241\/4779\/files\/RTDM-side1.png?v=1774569744"},{"product_id":"whittet-higgins-rtdm-06","title":"Whittet Higgins RTDM-06 Rethreading Die","description":"\u003cp\u003eThe Whittet-Higgins RTDM-06 is a metric rethreading die used to clean, repair, and reform damaged external shaft threads. Its ground threads precisely chase the shaft, efficiently removing old anaerobic locking compounds and particulate while correcting minor thread deformations to restore proper fit.\u003c\/p\u003e\u003cp\u003eThe hexagonal body is driven with readily available shop wrenches (adjustable, chain, strap, etc.), and the die is machined from case-hardened carbon steel. It conforms to the thread specifications delineated in ISO 2982-2:2013(E), is rated for a maximum operating temperature of 300°F, and is manufactured in the USA and RoHS compliant.\u003c\/p\u003e","brand":"Whittet-Higgins","offers":[{"title":"Default Title","offer_id":46304098975894,"sku":null,"price":360.93,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0305\/1241\/4779\/files\/RTDM-side1.png?v=1774569744"},{"product_id":"whittet-higgins-rtdm-064","title":"Whittet Higgins RTDM-064 Rethreading Die","description":"\u003cp\u003eThe Whittet-Higgins RTDM-064 is a metric rethreading die used to clean, repair, and reform damaged external shaft threads. Its ground threads precisely chase the shaft, efficiently removing old anaerobic locking compounds and particulate while correcting minor thread deformations to restore proper fit.\u003c\/p\u003e\u003cp\u003eThe hexagonal body is driven with readily available shop wrenches (adjustable, chain, strap, etc.), and the die is machined from case-hardened carbon steel. It conforms to the thread specifications delineated in ISO 2982-2:2013(E), is rated for a maximum operating temperature of 300°F, and is manufactured in the USA and RoHS compliant.\u003c\/p\u003e","brand":"Whittet-Higgins","offers":[{"title":"Default Title","offer_id":46304099041430,"sku":null,"price":548.75,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0305\/1241\/4779\/files\/RTDM-side1.png?v=1774569744"},{"product_id":"whittet-higgins-rtdm-07","title":"Whittet Higgins RTDM-07 Rethreading Die","description":"\u003cp\u003eThe Whittet-Higgins RTDM-07 is a metric rethreading die used to clean, repair, and reform damaged external shaft threads. Its ground threads precisely chase the shaft, efficiently removing old anaerobic locking compounds and particulate while correcting minor thread deformations to restore proper fit.\u003c\/p\u003e\u003cp\u003eThe hexagonal body is driven with readily available shop wrenches (adjustable, chain, strap, etc.), and the die is machined from case-hardened carbon steel. It conforms to the thread specifications delineated in ISO 2982-2:2013(E), is rated for a maximum operating temperature of 300°F, and is manufactured in the USA and RoHS compliant.\u003c\/p\u003e","brand":"Whittet-Higgins","offers":[{"title":"Default Title","offer_id":46304099106966,"sku":null,"price":309.21,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0305\/1241\/4779\/files\/RTDM-side1.png?v=1774569744"},{"product_id":"whittet-higgins-rtdm-08","title":"Whittet Higgins RTDM-08 Rethreading Die","description":"\u003cp\u003eThe Whittet-Higgins RTDM-08 is a metric rethreading die used to clean, repair, and reform damaged external shaft threads. Its ground threads precisely chase the shaft, efficiently removing old anaerobic locking compounds and particulate while correcting minor thread deformations to restore proper fit.\u003c\/p\u003e\u003cp\u003eThe hexagonal body is driven with readily available shop wrenches (adjustable, chain, strap, etc.), and the die is machined from case-hardened carbon steel. It conforms to the thread specifications delineated in ISO 2982-2:2013(E), is rated for a maximum operating temperature of 300°F, and is manufactured in the USA and RoHS compliant.\u003c\/p\u003e","brand":"Whittet-Higgins","offers":[{"title":"Default Title","offer_id":46304099139734,"sku":null,"price":563.98,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0305\/1241\/4779\/files\/RTDM-side1.png?v=1774569744"},{"product_id":"whittet-higgins-rtdm-09","title":"Whittet Higgins RTDM-09 Rethreading Die","description":"\u003cp\u003eThe Whittet-Higgins RTDM-09 is a metric rethreading die used to clean, repair, and reform damaged external shaft threads. Its ground threads precisely chase the shaft, efficiently removing old anaerobic locking compounds and particulate while correcting minor thread deformations to restore proper fit.\u003c\/p\u003e\u003cp\u003eThe hexagonal body is driven with readily available shop wrenches (adjustable, chain, strap, etc.), and the die is machined from case-hardened carbon steel. It conforms to the thread specifications delineated in ISO 2982-2:2013(E), is rated for a maximum operating temperature of 300°F, and is manufactured in the USA and RoHS compliant.\u003c\/p\u003e","brand":"Whittet-Higgins","offers":[{"title":"Default Title","offer_id":46304099172502,"sku":null,"price":737.84,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0305\/1241\/4779\/files\/RTDM-side1.png?v=1774569744"},{"product_id":"whittet-higgins-rtdm-10","title":"Whittet Higgins RTDM-10 Rethreading Die","description":"\u003cp\u003eThe Whittet-Higgins RTDM-10 is a metric rethreading die used to clean, repair, and reform damaged external shaft threads. Its ground threads precisely chase the shaft, efficiently removing old anaerobic locking compounds and particulate while correcting minor thread deformations to restore proper fit.\u003c\/p\u003e\u003cp\u003eThe hexagonal body is driven with readily available shop wrenches (adjustable, chain, strap, etc.), and the die is machined from case-hardened carbon steel. It conforms to the thread specifications delineated in ISO 2982-2:2013(E), is rated for a maximum operating temperature of 300°F, and is manufactured in the USA and RoHS compliant.\u003c\/p\u003e","brand":"Whittet-Higgins","offers":[{"title":"Default Title","offer_id":46304099205270,"sku":null,"price":848.6,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0305\/1241\/4779\/files\/RTDM-side1.png?v=1774569744"},{"product_id":"whittet-higgins-rtdm-11","title":"Whittet Higgins RTDM-11 Rethreading Die","description":"\u003cp\u003eThe Whittet-Higgins RTDM-11 is a metric rethreading die used to clean, repair, and reform damaged external shaft threads. Its ground threads precisely chase the shaft, efficiently removing old anaerobic locking compounds and particulate while correcting minor thread deformations to restore proper fit.\u003c\/p\u003e\u003cp\u003eThe hexagonal body is driven with readily available shop wrenches (adjustable, chain, strap, etc.), and the die is machined from case-hardened carbon steel. It conforms to the thread specifications delineated in ISO 2982-2:2013(E), is rated for a maximum operating temperature of 300°F, and is manufactured in the USA and RoHS compliant.\u003c\/p\u003e","brand":"Whittet-Higgins","offers":[{"title":"Default Title","offer_id":46304099238038,"sku":null,"price":893.36,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0305\/1241\/4779\/files\/RTDM-side1.png?v=1774569744"},{"product_id":"whittet-higgins-rtdm-12","title":"Whittet Higgins RTDM-12 Rethreading Die","description":"\u003cp\u003eThe Whittet-Higgins RTDM-12 is a metric rethreading die used to clean, repair, and reform damaged external shaft threads. Its ground threads precisely chase the shaft, efficiently removing old anaerobic locking compounds and particulate while correcting minor thread deformations to restore proper fit.\u003c\/p\u003e\u003cp\u003eThe hexagonal body is driven with readily available shop wrenches (adjustable, chain, strap, etc.), and the die is machined from case-hardened carbon steel. It conforms to the thread specifications delineated in ISO 2982-2:2013(E), is rated for a maximum operating temperature of 300°F, and is manufactured in the USA and RoHS compliant.\u003c\/p\u003e","brand":"Whittet-Higgins","offers":[{"title":"Default Title","offer_id":46304099270806,"sku":null,"price":1071.52,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0305\/1241\/4779\/files\/RTDM-side1.png?v=1774569744"},{"product_id":"whittet-higgins-rtdm-13","title":"Whittet Higgins RTDM-13 Rethreading Die","description":"\u003cp\u003eThe Whittet-Higgins RTDM-13 is a metric rethreading die used to clean, repair, and reform damaged external shaft threads. Its ground threads precisely chase the shaft, efficiently removing old anaerobic locking compounds and particulate while correcting minor thread deformations to restore proper fit.\u003c\/p\u003e\u003cp\u003eThe hexagonal body is driven with readily available shop wrenches (adjustable, chain, strap, etc.), and the die is machined from case-hardened carbon steel. It conforms to the thread specifications delineated in ISO 2982-2:2013(E), is rated for a maximum operating temperature of 300°F, and is manufactured in the USA and RoHS compliant.\u003c\/p\u003e","brand":"Whittet-Higgins","offers":[{"title":"Default Title","offer_id":46304099303574,"sku":null,"price":1181.21,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0305\/1241\/4779\/files\/RTDM-side1.png?v=1774569744"},{"product_id":"whittet-higgins-rtdm-14","title":"Whittet Higgins RTDM-14 Rethreading Die","description":"\u003cp\u003eThe Whittet-Higgins RTDM-14 is a metric rethreading die used to clean, repair, and reform damaged external shaft threads. Its ground threads precisely chase the shaft, efficiently removing old anaerobic locking compounds and particulate while correcting minor thread deformations to restore proper fit.\u003c\/p\u003e\u003cp\u003eThe hexagonal body is driven with readily available shop wrenches (adjustable, chain, strap, etc.), and the die is machined from case-hardened carbon steel. It conforms to the thread specifications delineated in ISO 2982-2:2013(E), is rated for a maximum operating temperature of 300°F, and is manufactured in the USA and RoHS compliant.\u003c\/p\u003e","brand":"Whittet-Higgins","offers":[{"title":"Default Title","offer_id":46304099336342,"sku":null,"price":1267.27,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0305\/1241\/4779\/files\/RTDM-side1.png?v=1774569744"},{"product_id":"whittet-higgins-rtdm-15","title":"Whittet Higgins RTDM-15 Rethreading Die","description":"\u003cp\u003eThe Whittet-Higgins RTDM-15 is a metric rethreading die used to clean, repair, and reform damaged external shaft threads. Its ground threads precisely chase the shaft, efficiently removing old anaerobic locking compounds and particulate while correcting minor thread deformations to restore proper fit.\u003c\/p\u003e\u003cp\u003eThe hexagonal body is driven with readily available shop wrenches (adjustable, chain, strap, etc.), and the die is machined from case-hardened carbon steel. It conforms to the thread specifications delineated in ISO 2982-2:2013(E), is rated for a maximum operating temperature of 300°F, and is manufactured in the USA and RoHS compliant.\u003c\/p\u003e","brand":"Whittet-Higgins","offers":[{"title":"Default Title","offer_id":46304099401878,"sku":null,"price":1638.04,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0305\/1241\/4779\/files\/RTDM-side1.png?v=1774569744"}],"url":"https:\/\/apollousa.com\/collections\/rtd-rtdm-series-rethreading-dies.oembed","provider":"Apollo Industries ","version":"1.0","type":"link"}