{"title":"SC Series Two-Piece Shaft Collars – Inch","description":"\u003cp\u003eThe SC series is a two-piece (split) inch shaft collar. Its clamshell design assembles around the shaft and is drawn tight by hardened alloy socket head cap screws, so it can be fitted or repositioned without pulling bearings, sprockets or couplings off the shaft first. The mechanical clamp grips soft and hardened shafts far more securely than a set-screw collar, resists loosening under vibration, shock and torque, and leaves no mar on the shaft. Available in carbon steel, aluminium (A suffix) and stainless steel (S suffix).\u003c\/p\u003e\n\u003ch2\u003eSC Series Specifications\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePart numbers:\u003c\/strong\u003e SC-02 through SC-64 (151 sizes stocked)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBore \/ shaft size:\u003c\/strong\u003e 0.125 in to 4 in\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOutside diameter:\u003c\/strong\u003e 0.625 in to 5.25 in\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial \u0026amp; temperature:\u003c\/strong\u003e Black-oxide carbon steel, aluminium or stainless steel, with hardened alloy socket head cap screws; 300°F maximum operating temperature\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eStandards:\u003c\/strong\u003e Made in USA, RoHS compliant\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eApplications\u003c\/h2\u003e\n\u003cp\u003eAdjustable shaft stops and shoulders, axial location of bearings, sprockets, sheaves and couplings, and retrofit work on installed shafting where a one-piece collar cannot be slid into place.\u003c\/p\u003e\n\u003ch2\u003eRelated Whittet-Higgins Series\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\u003ca href=\"\/collections\/cc-series-one-piece-clamp-collars\"\u003eCC Series One-Piece Clamp Collars – Inch\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"\/collections\/ccm-series-one-piece-clamp-collars-metric\"\u003eCCM Series One-Piece Clamp Collars – Metric\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"\/collections\/blc-series-bearlok-locking-collars\"\u003eBLC Series BEARLOK Locking Collars – Keyless Shrink Disc\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"\/collections\/snc-snf-sns-series-splitnuts\"\u003eSNC \/ SNF \/ SNS Series SPLITNUTS – Two-Piece Clamping Nuts\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eApollo is an authorized Whittet-Higgins distributor. Every part on this page is genuine Whittet-Higgins, manufactured in the USA. Need a size that is not listed, or help matching a locknut to its lockwasher and assembly socket? \u003ca href=\"\/pages\/contact\"\u003eContact our team\u003c\/a\u003e.\u003c\/p\u003e","products":[{"product_id":"whittet-higgins-sc-02-clamp-collar","title":"Whittet Higgins SC-02 Clamp Collar","description":"\u003cp\u003eThe Whittet-Higgins SC-02 is a two-piece (split) shaft collar machined to inch dimensions, used to create infinitely adjustable shaft stops, shoulders, and axial location of bearings and other power-transmission components. Its clamshell design assembles around the shaft and is drawn tight by hardened alloy socket head cap screws, so it can be installed or repositioned without removing adjacent components from the shaft.\u003c\/p\u003e\u003cp\u003eThis mechanical self-locking clamp grips both soft and hardened shafts far more securely than a set-screw collar, resisting loosening from vibration, shock, and torque while eliminating any need to cut or repair a shaft keyway. The carbon steel collar carries a black oxide coating with a wax finish for corrosion protection and pairs with a hardened alloy fastener tightened to the suggested torque for its size.\u003c\/p\u003e\u003cp\u003eSC-02 is manufactured in the USA and is RoHS compliant, with a maximum operating temperature of 300°F.\u003c\/p\u003e","brand":"Whittet-Higgins","offers":[{"title":"Default Title","offer_id":44051256639638,"sku":null,"price":17.74,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0305\/1241\/4779\/files\/Untitled_Project_19__Camera_SOLIDWORKS_Viewport.png?v=1758474858"},{"product_id":"whittet-higgins-sc-03-clamp-collar","title":"Whittet Higgins SC-03 Clamp Collar","description":"\u003cp\u003eThe Whittet-Higgins SC-03 is a two-piece (split) shaft collar machined to inch dimensions, used to create infinitely adjustable shaft stops, shoulders, and axial location of bearings and other power-transmission components. Its clamshell design assembles around the shaft and is drawn tight by hardened alloy socket head cap screws, so it can be installed or repositioned without removing adjacent components from the shaft.\u003c\/p\u003e\u003cp\u003eThis mechanical self-locking clamp grips both soft and hardened shafts far more securely than a set-screw collar, resisting loosening from vibration, shock, and torque while eliminating any need to cut or repair a shaft keyway. The carbon steel collar carries a black oxide coating with a wax finish for corrosion protection and pairs with a hardened alloy fastener tightened to the suggested torque for its size.\u003c\/p\u003e\u003cp\u003eSC-03 is manufactured in the USA and is RoHS compliant, with a maximum operating temperature of 300°F.\u003c\/p\u003e","brand":"Whittet-Higgins","offers":[{"title":"Default Title","offer_id":44051271286934,"sku":null,"price":13.32,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0305\/1241\/4779\/files\/Untitled_Project_19__Camera_SOLIDWORKS_Viewport.png?v=1758474858"},{"product_id":"whittet-higgins-sc-04-clamp-collar","title":"Whittet Higgins SC-04 Clamp Collar","description":"\u003cp\u003eThe Whittet-Higgins SC-04 is a two-piece (split) shaft collar machined to inch dimensions, used to create infinitely adjustable shaft stops, shoulders, and axial location of bearings and other power-transmission components. Its clamshell design assembles around the shaft and is drawn tight by hardened alloy socket head cap screws, so it can be installed or repositioned without removing adjacent components from the shaft.\u003c\/p\u003e\u003cp\u003eThis mechanical self-locking clamp grips both soft and hardened shafts far more securely than a set-screw collar, resisting loosening from vibration, shock, and torque while eliminating any need to cut or repair a shaft keyway. The carbon steel collar carries a black oxide coating with a wax finish for corrosion protection and pairs with a hardened alloy fastener tightened to the suggested torque for its size.\u003c\/p\u003e\u003cp\u003eSC-04 is manufactured in the USA and is RoHS compliant, with a maximum operating temperature of 300°F.\u003c\/p\u003e","brand":"Whittet-Higgins","offers":[{"title":"Default Title","offer_id":44051643531414,"sku":null,"price":12.63,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0305\/1241\/4779\/files\/Untitled_Project_19__Camera_SOLIDWORKS_Viewport.png?v=1758474858"},{"product_id":"whittet-higgins-sc-05-clamp-collar","title":"Whittet Higgins SC-05 Clamp Collar","description":"\u003cp\u003eThe Whittet-Higgins SC-05 is a two-piece (split) shaft collar machined to inch dimensions, used to create infinitely adjustable shaft stops, shoulders, and axial location of bearings and other power-transmission components. Its clamshell design assembles around the shaft and is drawn tight by hardened alloy socket head cap screws, so it can be installed or repositioned without removing adjacent components from the shaft.\u003c\/p\u003e\u003cp\u003eThis mechanical self-locking clamp grips both soft and hardened shafts far more securely than a set-screw collar, resisting loosening from vibration, shock, and torque while eliminating any need to cut or repair a shaft keyway. The carbon steel collar carries a black oxide coating with a wax finish for corrosion protection and pairs with a hardened alloy fastener tightened to the suggested torque for its size.\u003c\/p\u003e\u003cp\u003eSC-05 is manufactured in the USA and is RoHS compliant, with a maximum operating temperature of 300°F.\u003c\/p\u003e","brand":"Whittet-Higgins","offers":[{"title":"Default Title","offer_id":44051645563030,"sku":null,"price":13.14,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0305\/1241\/4779\/files\/Untitled_Project_19__Camera_SOLIDWORKS_Viewport.png?v=1758474858"},{"product_id":"whittet-higgins-sc-06-clamp-collar","title":"Whittet Higgins SC-06 Clamp Collar","description":"\u003cp\u003eThe Whittet-Higgins SC-06 is a two-piece (split) shaft collar machined to inch dimensions, used to create infinitely adjustable shaft stops, shoulders, and axial location of bearings and other power-transmission components. Its clamshell design assembles around the shaft and is drawn tight by hardened alloy socket head cap screws, so it can be installed or repositioned without removing adjacent components from the shaft.\u003c\/p\u003e\u003cp\u003eThis mechanical self-locking clamp grips both soft and hardened shafts far more securely than a set-screw collar, resisting loosening from vibration, shock, and torque while eliminating any need to cut or repair a shaft keyway. The carbon steel collar carries a black oxide coating with a wax finish for corrosion protection and pairs with a hardened alloy fastener tightened to the suggested torque for its size.\u003c\/p\u003e\u003cp\u003eSC-06 is manufactured in the USA and is RoHS compliant, with a maximum operating temperature of 300°F.\u003c\/p\u003e","brand":"Whittet-Higgins","offers":[{"title":"Default Title","offer_id":44051649462422,"sku":null,"price":12.91,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0305\/1241\/4779\/files\/Untitled_Project_19__Camera_SOLIDWORKS_Viewport.png?v=1758474858"},{"product_id":"whittet-higgins-sc-07-clamp-collar","title":"Whittet Higgins SC-07 Clamp Collar","description":"\u003cp\u003eThe Whittet-Higgins SC-07 is a two-piece (split) shaft collar machined to inch dimensions, used to create infinitely adjustable shaft stops, shoulders, and axial location of bearings and other power-transmission components. Its clamshell design assembles around the shaft and is drawn tight by hardened alloy socket head cap screws, so it can be installed or repositioned without removing adjacent components from the shaft.\u003c\/p\u003e\u003cp\u003eThis mechanical self-locking clamp grips both soft and hardened shafts far more securely than a set-screw collar, resisting loosening from vibration, shock, and torque while eliminating any need to cut or repair a shaft keyway. The carbon steel collar carries a black oxide coating with a wax finish for corrosion protection and pairs with a hardened alloy fastener tightened to the suggested torque for its size.\u003c\/p\u003e\u003cp\u003eSC-07 is manufactured in the USA and is RoHS compliant, with a maximum operating temperature of 300°F.\u003c\/p\u003e","brand":"Whittet-Higgins","offers":[{"title":"Default Title","offer_id":44051656835222,"sku":null,"price":13.96,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0305\/1241\/4779\/files\/Untitled_Project_19__Camera_SOLIDWORKS_Viewport.png?v=1758474858"},{"product_id":"whittet-higgins-sc-08-clamp-collar","title":"Whittet Higgins SC-08 Clamp Collar","description":"\u003cp\u003eThe Whittet-Higgins SC-08 is a two-piece (split) shaft collar machined to inch dimensions, used to create infinitely adjustable shaft stops, shoulders, and axial location of bearings and other power-transmission components. Its clamshell design assembles around the shaft and is drawn tight by hardened alloy socket head cap screws, so it can be installed or repositioned without removing adjacent components from the shaft.\u003c\/p\u003e\u003cp\u003eThis mechanical self-locking clamp grips both soft and hardened shafts far more securely than a set-screw collar, resisting loosening from vibration, shock, and torque while eliminating any need to cut or repair a shaft keyway. The carbon steel collar carries a black oxide coating with a wax finish for corrosion protection and pairs with a hardened alloy fastener tightened to the suggested torque for its size.\u003c\/p\u003e\u003cp\u003eSC-08 is manufactured in the USA and is RoHS compliant, with a maximum operating temperature of 300°F.\u003c\/p\u003e","brand":"Whittet-Higgins","offers":[{"title":"Default Title","offer_id":44051662143638,"sku":null,"price":11.92,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0305\/1241\/4779\/files\/Untitled_Project_19__Camera_SOLIDWORKS_Viewport.png?v=1758474858"},{"product_id":"whittet-higgins-sc-09-clamp-collar","title":"Whittet Higgins SC-09 Clamp Collar","description":"\u003cp\u003eThe Whittet-Higgins SC-09 is a two-piece (split) shaft collar machined to inch dimensions, used to create infinitely adjustable shaft stops, shoulders, and axial location of bearings and other power-transmission components. Its clamshell design assembles around the shaft and is drawn tight by hardened alloy socket head cap screws, so it can be installed or repositioned without removing adjacent components from the shaft.\u003c\/p\u003e\u003cp\u003eThis mechanical self-locking clamp grips both soft and hardened shafts far more securely than a set-screw collar, resisting loosening from vibration, shock, and torque while eliminating any need to cut or repair a shaft keyway. The carbon steel collar carries a black oxide coating with a wax finish for corrosion protection and pairs with a hardened alloy fastener tightened to the suggested torque for its size.\u003c\/p\u003e\u003cp\u003eSC-09 is manufactured in the USA and is RoHS compliant, with a maximum operating temperature of 300°F.\u003c\/p\u003e","brand":"Whittet-Higgins","offers":[{"title":"Default Title","offer_id":44051673153686,"sku":null,"price":14.76,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0305\/1241\/4779\/files\/Untitled_Project_19__Camera_SOLIDWORKS_Viewport.png?v=1758474858"},{"product_id":"whittet-higgins-sc-10-clamp-collar","title":"Whittet Higgins SC-10 Clamp Collar","description":"\u003cp\u003eThe Whittet-Higgins SC-10 is a two-piece (split) shaft collar machined to inch dimensions, used to create infinitely adjustable shaft stops, shoulders, and axial location of bearings and other power-transmission components. Its clamshell design assembles around the shaft and is drawn tight by hardened alloy socket head cap screws, so it can be installed or repositioned without removing adjacent components from the shaft.\u003c\/p\u003e\u003cp\u003eThis mechanical self-locking clamp grips both soft and hardened shafts far more securely than a set-screw collar, resisting loosening from vibration, shock, and torque while eliminating any need to cut or repair a shaft keyway. The carbon steel collar carries a black oxide coating with a wax finish for corrosion protection and pairs with a hardened alloy fastener tightened to the suggested torque for its size.\u003c\/p\u003e\u003cp\u003eSC-10 is manufactured in the USA and is RoHS compliant, with a maximum operating temperature of 300°F.\u003c\/p\u003e","brand":"Whittet-Higgins","offers":[{"title":"Default Title","offer_id":44051676594326,"sku":null,"price":14.11,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0305\/1241\/4779\/files\/Untitled_Project_19__Camera_SOLIDWORKS_Viewport.png?v=1758474858"},{"product_id":"whittet-higgins-sc-11-clamp-collar","title":"Whittet Higgins SC-11 Clamp Collar","description":"\u003cp\u003eThe Whittet-Higgins SC-11 is a two-piece (split) shaft collar machined to inch dimensions, used to create infinitely adjustable shaft stops, shoulders, and axial location of bearings and other power-transmission components. Its clamshell design assembles around the shaft and is drawn tight by hardened alloy socket head cap screws, so it can be installed or repositioned without removing adjacent components from the shaft.\u003c\/p\u003e\u003cp\u003eThis mechanical self-locking clamp grips both soft and hardened shafts far more securely than a set-screw collar, resisting loosening from vibration, shock, and torque while eliminating any need to cut or repair a shaft keyway. The carbon steel collar carries a black oxide coating with a wax finish for corrosion protection and pairs with a hardened alloy fastener tightened to the suggested torque for its size.\u003c\/p\u003e\u003cp\u003eSC-11 is manufactured in the USA and is RoHS compliant, with a maximum operating temperature of 300°F.\u003c\/p\u003e","brand":"Whittet-Higgins","offers":[{"title":"Default Title","offer_id":44051681116310,"sku":null,"price":17.23,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0305\/1241\/4779\/files\/Untitled_Project_19__Camera_SOLIDWORKS_Viewport.png?v=1758474858"},{"product_id":"whittet-higgins-sc-12-clamp-collar","title":"Whittet Higgins SC-12 Clamp Collar","description":"\u003cp\u003eThe Whittet-Higgins SC-12 is a two-piece (split) shaft collar machined to inch dimensions, used to create infinitely adjustable shaft stops, shoulders, and axial location of bearings and other power-transmission components. Its clamshell design assembles around the shaft and is drawn tight by hardened alloy socket head cap screws, so it can be installed or repositioned without removing adjacent components from the shaft.\u003c\/p\u003e\u003cp\u003eThis mechanical self-locking clamp grips both soft and hardened shafts far more securely than a set-screw collar, resisting loosening from vibration, shock, and torque while eliminating any need to cut or repair a shaft keyway. The carbon steel collar carries a black oxide coating with a wax finish for corrosion protection and pairs with a hardened alloy fastener tightened to the suggested torque for its size.\u003c\/p\u003e\u003cp\u003eSC-12 is manufactured in the USA and is RoHS compliant, with a maximum operating temperature of 300°F.\u003c\/p\u003e","brand":"Whittet-Higgins","offers":[{"title":"Default Title","offer_id":44051682721942,"sku":null,"price":16.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0305\/1241\/4779\/files\/Untitled_Project_19__Camera_SOLIDWORKS_Viewport.png?v=1758474858"},{"product_id":"whittet-higgins-sc-13-clamp-collar","title":"Whittet Higgins SC-13 Clamp Collar","description":"\u003cp\u003eThe Whittet-Higgins SC-13 is a two-piece (split) shaft collar machined to inch dimensions, used to create infinitely adjustable shaft stops, shoulders, and axial location of bearings and other power-transmission components. Its clamshell design assembles around the shaft and is drawn tight by hardened alloy socket head cap screws, so it can be installed or repositioned without removing adjacent components from the shaft.\u003c\/p\u003e\u003cp\u003eThis mechanical self-locking clamp grips both soft and hardened shafts far more securely than a set-screw collar, resisting loosening from vibration, shock, and torque while eliminating any need to cut or repair a shaft keyway. The carbon steel collar carries a black oxide coating with a wax finish for corrosion protection and pairs with a hardened alloy fastener tightened to the suggested torque for its size.\u003c\/p\u003e\u003cp\u003eSC-13 is manufactured in the USA and is RoHS compliant, with a maximum operating temperature of 300°F.\u003c\/p\u003e","brand":"Whittet-Higgins","offers":[{"title":"Default Title","offer_id":44051687571606,"sku":null,"price":19.91,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0305\/1241\/4779\/files\/Untitled_Project_19__Camera_SOLIDWORKS_Viewport.png?v=1758474858"},{"product_id":"whittet-higgins-sc-14-clamp-collar","title":"Whittet Higgins SC-14 Clamp Collar","description":"\u003cp\u003eThe Whittet-Higgins SC-14 is a two-piece (split) shaft collar machined to inch dimensions, used to create infinitely adjustable shaft stops, shoulders, and axial location of bearings and other power-transmission components. Its clamshell design assembles around the shaft and is drawn tight by hardened alloy socket head cap screws, so it can be installed or repositioned without removing adjacent components from the shaft.\u003c\/p\u003e\u003cp\u003eThis mechanical self-locking clamp grips both soft and hardened shafts far more securely than a set-screw collar, resisting loosening from vibration, shock, and torque while eliminating any need to cut or repair a shaft keyway. The carbon steel collar carries a black oxide coating with a wax finish for corrosion protection and pairs with a hardened alloy fastener tightened to the suggested torque for its size.\u003c\/p\u003e\u003cp\u003eSC-14 is manufactured in the USA and is RoHS compliant, with a maximum operating temperature of 300°F.\u003c\/p\u003e","brand":"Whittet-Higgins","offers":[{"title":"Default Title","offer_id":44051689996438,"sku":null,"price":18.23,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0305\/1241\/4779\/files\/Untitled_Project_19__Camera_SOLIDWORKS_Viewport.png?v=1758474858"},{"product_id":"whittet-higgins-sc-15-clamp-collar","title":"Whittet Higgins SC-15 Clamp Collar","description":"\u003cp\u003eThe Whittet-Higgins SC-15 is a two-piece (split) shaft collar machined to inch dimensions, used to create infinitely adjustable shaft stops, shoulders, and axial location of bearings and other power-transmission components. Its clamshell design assembles around the shaft and is drawn tight by hardened alloy socket head cap screws, so it can be installed or repositioned without removing adjacent components from the shaft.\u003c\/p\u003e\u003cp\u003eThis mechanical self-locking clamp grips both soft and hardened shafts far more securely than a set-screw collar, resisting loosening from vibration, shock, and torque while eliminating any need to cut or repair a shaft keyway. The carbon steel collar carries a black oxide coating with a wax finish for corrosion protection and pairs with a hardened alloy fastener tightened to the suggested torque for its size.\u003c\/p\u003e\u003cp\u003eSC-15 is manufactured in the USA and is RoHS compliant, with a maximum operating temperature of 300°F.\u003c\/p\u003e","brand":"Whittet-Higgins","offers":[{"title":"Default Title","offer_id":44051690913942,"sku":null,"price":21.84,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0305\/1241\/4779\/files\/Untitled_Project_19__Camera_SOLIDWORKS_Viewport.png?v=1758474858"},{"product_id":"whittet-higgins-sc-16-clamp-collar","title":"Whittet Higgins SC-16 Clamp Collar","description":"\u003cp\u003eThe Whittet-Higgins SC-16 is a two-piece (split) shaft collar machined to inch dimensions, used to create infinitely adjustable shaft stops, shoulders, and axial location of bearings and other power-transmission components. Its clamshell design assembles around the shaft and is drawn tight by hardened alloy socket head cap screws, so it can be installed or repositioned without removing adjacent components from the shaft.\u003c\/p\u003e\u003cp\u003eThis mechanical self-locking clamp grips both soft and hardened shafts far more securely than a set-screw collar, resisting loosening from vibration, shock, and torque while eliminating any need to cut or repair a shaft keyway. The carbon steel collar carries a black oxide coating with a wax finish for corrosion protection and pairs with a hardened alloy fastener tightened to the suggested torque for its size.\u003c\/p\u003e\u003cp\u003eSC-16 is manufactured in the USA and is RoHS compliant, with a maximum operating temperature of 300°F.\u003c\/p\u003e","brand":"Whittet-Higgins","offers":[{"title":"Default Title","offer_id":44051696746646,"sku":null,"price":17.93,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0305\/1241\/4779\/files\/Untitled_Project_19__Camera_SOLIDWORKS_Viewport.png?v=1758474858"},{"product_id":"whittet-higgins-sc-17-clamp-collar","title":"Whittet Higgins SC-17 Clamp Collar","description":"\u003cp\u003eThe Whittet-Higgins SC-17 is a two-piece (split) shaft collar machined to inch dimensions, used to create infinitely adjustable shaft stops, shoulders, and axial location of bearings and other power-transmission components. Its clamshell design assembles around the shaft and is drawn tight by hardened alloy socket head cap screws, so it can be installed or repositioned without removing adjacent components from the shaft.\u003c\/p\u003e\u003cp\u003eThis mechanical self-locking clamp grips both soft and hardened shafts far more securely than a set-screw collar, resisting loosening from vibration, shock, and torque while eliminating any need to cut or repair a shaft keyway. The carbon steel collar carries a black oxide coating with a wax finish for corrosion protection and pairs with a hardened alloy fastener tightened to the suggested torque for its size.\u003c\/p\u003e\u003cp\u003eSC-17 is manufactured in the USA and is RoHS compliant, with a maximum operating temperature of 300°F.\u003c\/p\u003e","brand":"Whittet-Higgins","offers":[{"title":"Default Title","offer_id":44051698122902,"sku":null,"price":22.36,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0305\/1241\/4779\/files\/Untitled_Project_19__Camera_SOLIDWORKS_Viewport.png?v=1758474858"},{"product_id":"whittet-higgins-sc-18-clamp-collar","title":"Whittet Higgins SC-18 Clamp Collar","description":"\u003cp\u003eThe Whittet-Higgins SC-18 is a two-piece (split) shaft collar machined to inch dimensions, used to create infinitely adjustable shaft stops, shoulders, and axial location of bearings and other power-transmission components. Its clamshell design assembles around the shaft and is drawn tight by hardened alloy socket head cap screws, so it can be installed or repositioned without removing adjacent components from the shaft.\u003c\/p\u003e\u003cp\u003eThis mechanical self-locking clamp grips both soft and hardened shafts far more securely than a set-screw collar, resisting loosening from vibration, shock, and torque while eliminating any need to cut or repair a shaft keyway. The carbon steel collar carries a black oxide coating with a wax finish for corrosion protection and pairs with a hardened alloy fastener tightened to the suggested torque for its size.\u003c\/p\u003e\u003cp\u003eSC-18 is manufactured in the USA and is RoHS compliant, with a maximum operating temperature of 300°F.\u003c\/p\u003e","brand":"Whittet-Higgins","offers":[{"title":"Default Title","offer_id":44051700908182,"sku":null,"price":21.73,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0305\/1241\/4779\/files\/Untitled_Project_19__Camera_SOLIDWORKS_Viewport.png?v=1758474858"},{"product_id":"whittet-higgins-sc-19clamp-collar","title":"Whittet Higgins SC-19 Clamp Collar","description":"\u003cp\u003eThe Whittet-Higgins SC-19 is a two-piece (split) shaft collar machined to inch dimensions, used to create infinitely adjustable shaft stops, shoulders, and axial location of bearings and other power-transmission components. Its clamshell design assembles around the shaft and is drawn tight by hardened alloy socket head cap screws, so it can be installed or repositioned without removing adjacent components from the shaft.\u003c\/p\u003e\u003cp\u003eThis mechanical self-locking clamp grips both soft and hardened shafts far more securely than a set-screw collar, resisting loosening from vibration, shock, and torque while eliminating any need to cut or repair a shaft keyway. The carbon steel collar carries a black oxide coating with a wax finish for corrosion protection and pairs with a hardened alloy fastener tightened to the suggested torque for its size.\u003c\/p\u003e\u003cp\u003eSC-19 is manufactured in the USA and is RoHS compliant, with a maximum operating temperature of 300°F.\u003c\/p\u003e","brand":"Whittet-Higgins","offers":[{"title":"Default Title","offer_id":44051706249366,"sku":null,"price":22.36,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0305\/1241\/4779\/files\/Untitled_Project_19__Camera_SOLIDWORKS_Viewport.png?v=1758474858"},{"product_id":"whittet-higgins-sc-20-clamp-collar","title":"Whittet Higgins SC-20 Clamp Collar","description":"\u003cp\u003eThe Whittet-Higgins SC-20 is a two-piece (split) shaft collar machined to inch dimensions, used to create infinitely adjustable shaft stops, shoulders, and axial location of bearings and other power-transmission components. Its clamshell design assembles around the shaft and is drawn tight by hardened alloy socket head cap screws, so it can be installed or repositioned without removing adjacent components from the shaft.\u003c\/p\u003e\u003cp\u003eThis mechanical self-locking clamp grips both soft and hardened shafts far more securely than a set-screw collar, resisting loosening from vibration, shock, and torque while eliminating any need to cut or repair a shaft keyway. The carbon steel collar carries a black oxide coating with a wax finish for corrosion protection and pairs with a hardened alloy fastener tightened to the suggested torque for its size.\u003c\/p\u003e\u003cp\u003eSC-20 is manufactured in the USA and is RoHS compliant, with a maximum operating temperature of 300°F.\u003c\/p\u003e","brand":"Whittet-Higgins","offers":[{"title":"Default Title","offer_id":44051712835734,"sku":null,"price":21.31,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0305\/1241\/4779\/files\/Untitled_Project_19__Camera_SOLIDWORKS_Viewport.png?v=1758474858"},{"product_id":"whittet-higgins-sc-21-clamp-collar","title":"Whittet Higgins SC-21 Clamp Collar","description":"\u003cp\u003eThe Whittet-Higgins SC-21 is a two-piece (split) shaft collar machined to inch dimensions, used to create infinitely adjustable shaft stops, shoulders, and axial location of bearings and other power-transmission components. Its clamshell design assembles around the shaft and is drawn tight by hardened alloy socket head cap screws, so it can be installed or repositioned without removing adjacent components from the shaft.\u003c\/p\u003e\u003cp\u003eThis mechanical self-locking clamp grips both soft and hardened shafts far more securely than a set-screw collar, resisting loosening from vibration, shock, and torque while eliminating any need to cut or repair a shaft keyway. The carbon steel collar carries a black oxide coating with a wax finish for corrosion protection and pairs with a hardened alloy fastener tightened to the suggested torque for its size.\u003c\/p\u003e\u003cp\u003eSC-21 is manufactured in the USA and is RoHS compliant, with a maximum operating temperature of 300°F.\u003c\/p\u003e","brand":"Whittet-Higgins","offers":[{"title":"Default Title","offer_id":44051717292182,"sku":null,"price":25.49,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0305\/1241\/4779\/files\/Untitled_Project_19__Camera_SOLIDWORKS_Viewport.png?v=1758474858"},{"product_id":"whittet-higgins-sc-22-clamp-collar","title":"Whittet Higgins SC-22 Clamp Collar","description":"\u003cp\u003eThe Whittet-Higgins SC-22 is a two-piece (split) shaft collar machined to inch dimensions, used to create infinitely adjustable shaft stops, shoulders, and axial location of bearings and other power-transmission components. Its clamshell design assembles around the shaft and is drawn tight by hardened alloy socket head cap screws, so it can be installed or repositioned without removing adjacent components from the shaft.\u003c\/p\u003e\u003cp\u003eThis mechanical self-locking clamp grips both soft and hardened shafts far more securely than a set-screw collar, resisting loosening from vibration, shock, and torque while eliminating any need to cut or repair a shaft keyway. The carbon steel collar carries a black oxide coating with a wax finish for corrosion protection and pairs with a hardened alloy fastener tightened to the suggested torque for its size.\u003c\/p\u003e\u003cp\u003eSC-22 is manufactured in the USA and is RoHS compliant, with a maximum operating temperature of 300°F.\u003c\/p\u003e","brand":"Whittet-Higgins","offers":[{"title":"Default Title","offer_id":44051721617558,"sku":null,"price":23.97,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0305\/1241\/4779\/files\/Untitled_Project_19__Camera_SOLIDWORKS_Viewport.png?v=1758474858"},{"product_id":"whittet-higgins-sc-23-clamp-collar","title":"Whittet Higgins SC-23 Clamp Collar","description":"\u003cp\u003eThe Whittet-Higgins SC-23 is a two-piece (split) shaft collar machined to inch dimensions, used to create infinitely adjustable shaft stops, shoulders, and axial location of bearings and other power-transmission components. Its clamshell design assembles around the shaft and is drawn tight by hardened alloy socket head cap screws, so it can be installed or repositioned without removing adjacent components from the shaft.\u003c\/p\u003e\u003cp\u003eThis mechanical self-locking clamp grips both soft and hardened shafts far more securely than a set-screw collar, resisting loosening from vibration, shock, and torque while eliminating any need to cut or repair a shaft keyway. The carbon steel collar carries a black oxide coating with a wax finish for corrosion protection and pairs with a hardened alloy fastener tightened to the suggested torque for its size.\u003c\/p\u003e\u003cp\u003eSC-23 is manufactured in the USA and is RoHS compliant, with a maximum operating temperature of 300°F.\u003c\/p\u003e","brand":"Whittet-Higgins","offers":[{"title":"Default Title","offer_id":44051726696598,"sku":null,"price":23.97,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0305\/1241\/4779\/files\/Untitled_Project_19__Camera_SOLIDWORKS_Viewport.png?v=1758474858"},{"product_id":"whittet-higgins-sc-24-clamp-collar","title":"Whittet Higgins SC-24 Clamp Collar","description":"\u003cp\u003eThe Whittet-Higgins SC-24 is a two-piece (split) shaft collar machined to inch dimensions, used to create infinitely adjustable shaft stops, shoulders, and axial location of bearings and other power-transmission components. Its clamshell design assembles around the shaft and is drawn tight by hardened alloy socket head cap screws, so it can be installed or repositioned without removing adjacent components from the shaft.\u003c\/p\u003e\u003cp\u003eThis mechanical self-locking clamp grips both soft and hardened shafts far more securely than a set-screw collar, resisting loosening from vibration, shock, and torque while eliminating any need to cut or repair a shaft keyway. The carbon steel collar carries a black oxide coating with a wax finish for corrosion protection and pairs with a hardened alloy fastener tightened to the suggested torque for its size.\u003c\/p\u003e\u003cp\u003eSC-24 is manufactured in the USA and is RoHS compliant, with a maximum operating temperature of 300°F.\u003c\/p\u003e","brand":"Whittet-Higgins","offers":[{"title":"Default Title","offer_id":44051735478422,"sku":null,"price":23.97,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0305\/1241\/4779\/files\/Untitled_Project_19__Camera_SOLIDWORKS_Viewport.png?v=1758474858"},{"product_id":"whittet-higgins-sc-25-clamp-collar","title":"Whittet Higgins SC-25 Clamp Collar","description":"\u003cp\u003eThe Whittet-Higgins SC-25 is a two-piece (split) shaft collar machined to inch dimensions, used to create infinitely adjustable shaft stops, shoulders, and axial location of bearings and other power-transmission components. Its clamshell design assembles around the shaft and is drawn tight by hardened alloy socket head cap screws, so it can be installed or repositioned without removing adjacent components from the shaft.\u003c\/p\u003e\u003cp\u003eThis mechanical self-locking clamp grips both soft and hardened shafts far more securely than a set-screw collar, resisting loosening from vibration, shock, and torque while eliminating any need to cut or repair a shaft keyway. The carbon steel collar carries a black oxide coating with a wax finish for corrosion protection and pairs with a hardened alloy fastener tightened to the suggested torque for its size.\u003c\/p\u003e\u003cp\u003eSC-25 is manufactured in the USA and is RoHS compliant, with a maximum operating temperature of 300°F.\u003c\/p\u003e","brand":"Whittet-Higgins","offers":[{"title":"Default Title","offer_id":44051738001558,"sku":null,"price":42.76,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0305\/1241\/4779\/files\/Untitled_Project_19__Camera_SOLIDWORKS_Viewport.png?v=1758474858"},{"product_id":"whittet-higgins-sc-26-clamp-collar","title":"Whittet Higgins SC-26 Clamp Collar","description":"\u003cp\u003eThe Whittet-Higgins SC-26 is a two-piece (split) shaft collar machined to inch dimensions, used to create infinitely adjustable shaft stops, shoulders, and axial location of bearings and other power-transmission components. Its clamshell design assembles around the shaft and is drawn tight by hardened alloy socket head cap screws, so it can be installed or repositioned without removing adjacent components from the shaft.\u003c\/p\u003e\u003cp\u003eThis mechanical self-locking clamp grips both soft and hardened shafts far more securely than a set-screw collar, resisting loosening from vibration, shock, and torque while eliminating any need to cut or repair a shaft keyway. The carbon steel collar carries a black oxide coating with a wax finish for corrosion protection and pairs with a hardened alloy fastener tightened to the suggested torque for its size.\u003c\/p\u003e\u003cp\u003eSC-26 is manufactured in the USA and is RoHS compliant, with a maximum operating temperature of 300°F.\u003c\/p\u003e","brand":"Whittet-Higgins","offers":[{"title":"Default Title","offer_id":44051739050134,"sku":null,"price":42.76,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0305\/1241\/4779\/files\/Untitled_Project_19__Camera_SOLIDWORKS_Viewport.png?v=1758474858"},{"product_id":"whittet-higgins-sc-27-clamp-collar","title":"Whittet Higgins SC-27 Clamp Collar","description":"\u003cp\u003eThe Whittet-Higgins SC-27 is a two-piece (split) shaft collar machined to inch dimensions, used to create infinitely adjustable shaft stops, shoulders, and axial location of bearings and other power-transmission components. Its clamshell design assembles around the shaft and is drawn tight by hardened alloy socket head cap screws, so it can be installed or repositioned without removing adjacent components from the shaft.\u003c\/p\u003e\u003cp\u003eThis mechanical self-locking clamp grips both soft and hardened shafts far more securely than a set-screw collar, resisting loosening from vibration, shock, and torque while eliminating any need to cut or repair a shaft keyway. The carbon steel collar carries a black oxide coating with a wax finish for corrosion protection and pairs with a hardened alloy fastener tightened to the suggested torque for its size.\u003c\/p\u003e\u003cp\u003eSC-27 is manufactured in the USA and is RoHS compliant, with a maximum operating temperature of 300°F.\u003c\/p\u003e","brand":"Whittet-Higgins","offers":[{"title":"Default Title","offer_id":44051743375510,"sku":null,"price":43.79,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0305\/1241\/4779\/files\/Untitled_Project_19__Camera_SOLIDWORKS_Viewport.png?v=1758474858"},{"product_id":"whittet-higgins-sc-28-clamp-collar","title":"Whittet Higgins SC-28 Clamp Collar","description":"\u003cp\u003eThe Whittet-Higgins SC-28 is a two-piece (split) shaft collar machined to inch dimensions, used to create infinitely adjustable shaft stops, shoulders, and axial location of bearings and other power-transmission components. Its clamshell design assembles around the shaft and is drawn tight by hardened alloy socket head cap screws, so it can be installed or repositioned without removing adjacent components from the shaft.\u003c\/p\u003e\u003cp\u003eThis mechanical self-locking clamp grips both soft and hardened shafts far more securely than a set-screw collar, resisting loosening from vibration, shock, and torque while eliminating any need to cut or repair a shaft keyway. The carbon steel collar carries a black oxide coating with a wax finish for corrosion protection and pairs with a hardened alloy fastener tightened to the suggested torque for its size.\u003c\/p\u003e\u003cp\u003eSC-28 is manufactured in the USA and is RoHS compliant, with a maximum operating temperature of 300°F.\u003c\/p\u003e","brand":"Whittet-Higgins","offers":[{"title":"Default Title","offer_id":44051746128022,"sku":null,"price":39.56,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0305\/1241\/4779\/files\/Untitled_Project_19__Camera_SOLIDWORKS_Viewport.png?v=1758474858"},{"product_id":"whittet-higgins-sc-29-clamp-collar","title":"Whittet Higgins SC-29 Clamp Collar","description":"\u003cp\u003eThe Whittet-Higgins SC-29 is a two-piece (split) shaft collar machined to inch dimensions, used to create infinitely adjustable shaft stops, shoulders, and axial location of bearings and other power-transmission components. Its clamshell design assembles around the shaft and is drawn tight by hardened alloy socket head cap screws, so it can be installed or repositioned without removing adjacent components from the shaft.\u003c\/p\u003e\u003cp\u003eThis mechanical self-locking clamp grips both soft and hardened shafts far more securely than a set-screw collar, resisting loosening from vibration, shock, and torque while eliminating any need to cut or repair a shaft keyway. The carbon steel collar carries a black oxide coating with a wax finish for corrosion protection and pairs with a hardened alloy fastener tightened to the suggested torque for its size.\u003c\/p\u003e\u003cp\u003eSC-29 is manufactured in the USA and is RoHS compliant, with a maximum operating temperature of 300°F.\u003c\/p\u003e","brand":"Whittet-Higgins","offers":[{"title":"Default Title","offer_id":44051751338134,"sku":null,"price":46.78,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0305\/1241\/4779\/files\/Untitled_Project_19__Camera_SOLIDWORKS_Viewport.png?v=1758474858"},{"product_id":"whittet-higgins-sc-30-clamp-collar","title":"Whittet Higgins SC-30 Clamp Collar","description":"\u003cp\u003eThe Whittet-Higgins SC-30 is a two-piece (split) shaft collar machined to inch dimensions, used to create infinitely adjustable shaft stops, shoulders, and axial location of bearings and other power-transmission components. Its clamshell design assembles around the shaft and is drawn tight by hardened alloy socket head cap screws, so it can be installed or repositioned without removing adjacent components from the shaft.\u003c\/p\u003e\u003cp\u003eThis mechanical self-locking clamp grips both soft and hardened shafts far more securely than a set-screw collar, resisting loosening from vibration, shock, and torque while eliminating any need to cut or repair a shaft keyway. The carbon steel collar carries a black oxide coating with a wax finish for corrosion protection and pairs with a hardened alloy fastener tightened to the suggested torque for its size.\u003c\/p\u003e\u003cp\u003eSC-30 is manufactured in the USA and is RoHS compliant, with a maximum operating temperature of 300°F.\u003c\/p\u003e","brand":"Whittet-Higgins","offers":[{"title":"Default Title","offer_id":44051761299606,"sku":null,"price":45.85,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0305\/1241\/4779\/files\/Untitled_Project_19__Camera_SOLIDWORKS_Viewport.png?v=1758474858"},{"product_id":"whittet-higgins-sc-31-clamp-collar","title":"Whittet Higgins SC-31 Clamp Collar","description":"\u003cp\u003eThe Whittet-Higgins SC-31 is a two-piece (split) shaft collar machined to inch dimensions, used to create infinitely adjustable shaft stops, shoulders, and axial location of bearings and other power-transmission components. Its clamshell design assembles around the shaft and is drawn tight by hardened alloy socket head cap screws, so it can be installed or repositioned without removing adjacent components from the shaft.\u003c\/p\u003e\u003cp\u003eThis mechanical self-locking clamp grips both soft and hardened shafts far more securely than a set-screw collar, resisting loosening from vibration, shock, and torque while eliminating any need to cut or repair a shaft keyway. The carbon steel collar carries a black oxide coating with a wax finish for corrosion protection and pairs with a hardened alloy fastener tightened to the suggested torque for its size.\u003c\/p\u003e\u003cp\u003eSC-31 is manufactured in the USA and is RoHS compliant, with a maximum operating temperature of 300°F.\u003c\/p\u003e","brand":"Whittet-Higgins","offers":[{"title":"Default Title","offer_id":44051764084886,"sku":null,"price":45.96,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0305\/1241\/4779\/files\/Untitled_Project_19__Camera_SOLIDWORKS_Viewport.png?v=1758474858"},{"product_id":"whittet-higgins-sc-32-clamp-collar","title":"Whittet Higgins SC-32 Clamp Collar","description":"\u003cp\u003eThe Whittet-Higgins SC-32 is a two-piece (split) shaft collar machined to inch dimensions, used to create infinitely adjustable shaft stops, shoulders, and axial location of bearings and other power-transmission components. Its clamshell design assembles around the shaft and is drawn tight by hardened alloy socket head cap screws, so it can be installed or repositioned without removing adjacent components from the shaft.\u003c\/p\u003e\u003cp\u003eThis mechanical self-locking clamp grips both soft and hardened shafts far more securely than a set-screw collar, resisting loosening from vibration, shock, and torque while eliminating any need to cut or repair a shaft keyway. The carbon steel collar carries a black oxide coating with a wax finish for corrosion protection and pairs with a hardened alloy fastener tightened to the suggested torque for its size.\u003c\/p\u003e\u003cp\u003eSC-32 is manufactured in the USA and is RoHS compliant, with a maximum operating temperature of 300°F.\u003c\/p\u003e","brand":"Whittet-Higgins","offers":[{"title":"Default Title","offer_id":44051770245270,"sku":null,"price":44.12,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0305\/1241\/4779\/files\/Untitled_Project_19__Camera_SOLIDWORKS_Viewport.png?v=1758474858"},{"product_id":"whittet-higgins-sc-33-clamp-collar","title":"Whittet Higgins SC-33 Clamp Collar","description":"\u003cp\u003eThe Whittet-Higgins SC-33 is a two-piece (split) shaft collar machined to inch dimensions, used to create infinitely adjustable shaft stops, shoulders, and axial location of bearings and other power-transmission components. Its clamshell design assembles around the shaft and is drawn tight by hardened alloy socket head cap screws, so it can be installed or repositioned without removing adjacent components from the shaft.\u003c\/p\u003e\u003cp\u003eThis mechanical self-locking clamp grips both soft and hardened shafts far more securely than a set-screw collar, resisting loosening from vibration, shock, and torque while eliminating any need to cut or repair a shaft keyway. The carbon steel collar carries a black oxide coating with a wax finish for corrosion protection and pairs with a hardened alloy fastener tightened to the suggested torque for its size.\u003c\/p\u003e\u003cp\u003eSC-33 is manufactured in the USA and is RoHS compliant, with a maximum operating temperature of 300°F.\u003c\/p\u003e","brand":"Whittet-Higgins","offers":[{"title":"Default Title","offer_id":44051774341270,"sku":null,"price":60.4,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0305\/1241\/4779\/files\/Untitled_Project_19__Camera_SOLIDWORKS_Viewport.png?v=1758474858"},{"product_id":"whittet-higgins-sc-34-clamp-collar","title":"Whittet Higgins SC-34 Clamp Collar","description":"\u003cp\u003eThe Whittet-Higgins SC-34 is a two-piece (split) shaft collar machined to inch dimensions, used to create infinitely adjustable shaft stops, shoulders, and axial location of bearings and other power-transmission components. Its clamshell design assembles around the shaft and is drawn tight by hardened alloy socket head cap screws, so it can be installed or repositioned without removing adjacent components from the shaft.\u003c\/p\u003e\u003cp\u003eThis mechanical self-locking clamp grips both soft and hardened shafts far more securely than a set-screw collar, resisting loosening from vibration, shock, and torque while eliminating any need to cut or repair a shaft keyway. The carbon steel collar carries a black oxide coating with a wax finish for corrosion protection and pairs with a hardened alloy fastener tightened to the suggested torque for its size.\u003c\/p\u003e\u003cp\u003eSC-34 is manufactured in the USA and is RoHS compliant, with a maximum operating temperature of 300°F.\u003c\/p\u003e","brand":"Whittet-Higgins","offers":[{"title":"Default Title","offer_id":44051778437270,"sku":null,"price":51.85,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0305\/1241\/4779\/files\/Untitled_Project_19__Camera_SOLIDWORKS_Viewport.png?v=1758474858"},{"product_id":"whittet-higgins-sc-35-clamp-collar","title":"Whittet Higgins SC-35 Clamp Collar","description":"\u003cp\u003eThe Whittet-Higgins SC-35 is a two-piece (split) shaft collar machined to inch dimensions, used to create infinitely adjustable shaft stops, shoulders, and axial location of bearings and other power-transmission components. Its clamshell design assembles around the shaft and is drawn tight by hardened alloy socket head cap screws, so it can be installed or repositioned without removing adjacent components from the shaft.\u003c\/p\u003e\u003cp\u003eThis mechanical self-locking clamp grips both soft and hardened shafts far more securely than a set-screw collar, resisting loosening from vibration, shock, and torque while eliminating any need to cut or repair a shaft keyway. The carbon steel collar carries a black oxide coating with a wax finish for corrosion protection and pairs with a hardened alloy fastener tightened to the suggested torque for its size.\u003c\/p\u003e\u003cp\u003eSC-35 is manufactured in the USA and is RoHS compliant, with a maximum operating temperature of 300°F.\u003c\/p\u003e","brand":"Whittet-Higgins","offers":[{"title":"Default Title","offer_id":44051781976214,"sku":null,"price":54.49,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0305\/1241\/4779\/files\/Untitled_Project_19__Camera_SOLIDWORKS_Viewport.png?v=1758474858"},{"product_id":"whittet-higgins-sc-36-clamp-collar","title":"Whittet Higgins SC-36 Clamp Collar","description":"\u003cp\u003eThe Whittet-Higgins SC-36 is a two-piece (split) shaft collar machined to inch dimensions, used to create infinitely adjustable shaft stops, shoulders, and axial location of bearings and other power-transmission components. Its clamshell design assembles around the shaft and is drawn tight by hardened alloy socket head cap screws, so it can be installed or repositioned without removing adjacent components from the shaft.\u003c\/p\u003e\u003cp\u003eThis mechanical self-locking clamp grips both soft and hardened shafts far more securely than a set-screw collar, resisting loosening from vibration, shock, and torque while eliminating any need to cut or repair a shaft keyway. The carbon steel collar carries a black oxide coating with a wax finish for corrosion protection and pairs with a hardened alloy fastener tightened to the suggested torque for its size.\u003c\/p\u003e\u003cp\u003eSC-36 is manufactured in the USA and is RoHS compliant, with a maximum operating temperature of 300°F.\u003c\/p\u003e","brand":"Whittet-Higgins","offers":[{"title":"Default Title","offer_id":44051783975062,"sku":null,"price":52.96,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0305\/1241\/4779\/files\/Untitled_Project_19__Camera_SOLIDWORKS_Viewport.png?v=1758474858"},{"product_id":"whittet-higgins-sc-37-clamp-collar","title":"Whittet Higgins SC-37 Clamp Collar","description":"\u003cp\u003eThe Whittet-Higgins SC-37 is a two-piece (split) shaft collar machined to inch dimensions, used to create infinitely adjustable shaft stops, shoulders, and axial location of bearings and other power-transmission components. Its clamshell design assembles around the shaft and is drawn tight by hardened alloy socket head cap screws, so it can be installed or repositioned without removing adjacent components from the shaft.\u003c\/p\u003e\u003cp\u003eThis mechanical self-locking clamp grips both soft and hardened shafts far more securely than a set-screw collar, resisting loosening from vibration, shock, and torque while eliminating any need to cut or repair a shaft keyway. The carbon steel collar carries a black oxide coating with a wax finish for corrosion protection and pairs with a hardened alloy fastener tightened to the suggested torque for its size.\u003c\/p\u003e\u003cp\u003eSC-37 is manufactured in the USA and is RoHS compliant, with a maximum operating temperature of 300°F.\u003c\/p\u003e","brand":"Whittet-Higgins","offers":[{"title":"Default Title","offer_id":44051790004374,"sku":null,"price":64.24,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0305\/1241\/4779\/files\/Untitled_Project_19__Camera_SOLIDWORKS_Viewport.png?v=1758474858"},{"product_id":"whittet-higgins-sc-38-clamp-collar","title":"Whittet Higgins SC-38 Clamp Collar","description":"\u003cp\u003eThe Whittet-Higgins SC-38 is a two-piece (split) shaft collar machined to inch dimensions, used to create infinitely adjustable shaft stops, shoulders, and axial location of bearings and other power-transmission components. Its clamshell design assembles around the shaft and is drawn tight by hardened alloy socket head cap screws, so it can be installed or repositioned without removing adjacent components from the shaft.\u003c\/p\u003e\u003cp\u003eThis mechanical self-locking clamp grips both soft and hardened shafts far more securely than a set-screw collar, resisting loosening from vibration, shock, and torque while eliminating any need to cut or repair a shaft keyway. The carbon steel collar carries a black oxide coating with a wax finish for corrosion protection and pairs with a hardened alloy fastener tightened to the suggested torque for its size.\u003c\/p\u003e\u003cp\u003eSC-38 is manufactured in the USA and is RoHS compliant, with a maximum operating temperature of 300°F.\u003c\/p\u003e","brand":"Whittet-Higgins","offers":[{"title":"Default Title","offer_id":44051791610006,"sku":null,"price":58.1,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0305\/1241\/4779\/files\/Untitled_Project_19__Camera_SOLIDWORKS_Viewport.png?v=1758474858"},{"product_id":"whittet-higgins-sc-39-clamp-collar","title":"Whittet Higgins SC-39 Clamp Collar","description":"\u003cp\u003eThe Whittet-Higgins SC-39 is a two-piece (split) shaft collar machined to inch dimensions, used to create infinitely adjustable shaft stops, shoulders, and axial location of bearings and other power-transmission components. Its clamshell design assembles around the shaft and is drawn tight by hardened alloy socket head cap screws, so it can be installed or repositioned without removing adjacent components from the shaft.\u003c\/p\u003e\u003cp\u003eThis mechanical self-locking clamp grips both soft and hardened shafts far more securely than a set-screw collar, resisting loosening from vibration, shock, and torque while eliminating any need to cut or repair a shaft keyway. The carbon steel collar carries a black oxide coating with a wax finish for corrosion protection and pairs with a hardened alloy fastener tightened to the suggested torque for its size.\u003c\/p\u003e\u003cp\u003eSC-39 is manufactured in the USA and is RoHS compliant, with a maximum operating temperature of 300°F.\u003c\/p\u003e","brand":"Whittet-Higgins","offers":[{"title":"Default Title","offer_id":44051795345558,"sku":null,"price":66.24,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0305\/1241\/4779\/files\/Untitled_Project_19__Camera_SOLIDWORKS_Viewport.png?v=1758474858"},{"product_id":"whittet-higgins-sc-40-clamp-collar","title":"Whittet Higgins SC-40 Clamp Collar","description":"\u003cp\u003eThe Whittet-Higgins SC-40 is a two-piece (split) shaft collar machined to inch dimensions, used to create infinitely adjustable shaft stops, shoulders, and axial location of bearings and other power-transmission components. Its clamshell design assembles around the shaft and is drawn tight by hardened alloy socket head cap screws, so it can be installed or repositioned without removing adjacent components from the shaft.\u003c\/p\u003e\u003cp\u003eThis mechanical self-locking clamp grips both soft and hardened shafts far more securely than a set-screw collar, resisting loosening from vibration, shock, and torque while eliminating any need to cut or repair a shaft keyway. The carbon steel collar carries a black oxide coating with a wax finish for corrosion protection and pairs with a hardened alloy fastener tightened to the suggested torque for its size.\u003c\/p\u003e\u003cp\u003eSC-40 is manufactured in the USA and is RoHS compliant, with a maximum operating temperature of 300°F.\u003c\/p\u003e","brand":"Whittet-Higgins","offers":[{"title":"Default Title","offer_id":44051798458518,"sku":null,"price":96.54,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0305\/1241\/4779\/files\/Untitled_Project_19__Camera_SOLIDWORKS_Viewport.png?v=1758474858"},{"product_id":"whittet-higgins-sc-41-clamp-collar","title":"Whittet Higgins SC-41 Clamp Collar","description":"\u003cp\u003eThe Whittet-Higgins SC-41 is a two-piece (split) shaft collar machined to inch dimensions, used to create infinitely adjustable shaft stops, shoulders, and axial location of bearings and other power-transmission components. Its clamshell design assembles around the shaft and is drawn tight by hardened alloy socket head cap screws, so it can be installed or repositioned without removing adjacent components from the shaft.\u003c\/p\u003e\u003cp\u003eThis mechanical self-locking clamp grips both soft and hardened shafts far more securely than a set-screw collar, resisting loosening from vibration, shock, and torque while eliminating any need to cut or repair a shaft keyway. The carbon steel collar carries a black oxide coating with a wax finish for corrosion protection and pairs with a hardened alloy fastener tightened to the suggested torque for its size.\u003c\/p\u003e\u003cp\u003eSC-41 is manufactured in the USA and is RoHS compliant, with a maximum operating temperature of 300°F.\u003c\/p\u003e","brand":"Whittet-Higgins","offers":[{"title":"Default Title","offer_id":44051802062998,"sku":null,"price":114.65,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0305\/1241\/4779\/files\/Untitled_Project_19__Camera_SOLIDWORKS_Viewport.png?v=1758474858"},{"product_id":"whittet-higgins-sc-42-clamp-collar","title":"Whittet Higgins SC-42 Clamp Collar","description":"\u003cp\u003eThe Whittet-Higgins SC-42 is a two-piece (split) shaft collar machined to inch dimensions, used to create infinitely adjustable shaft stops, shoulders, and axial location of bearings and other power-transmission components. Its clamshell design assembles around the shaft and is drawn tight by hardened alloy socket head cap screws, so it can be installed or repositioned without removing adjacent components from the shaft.\u003c\/p\u003e\u003cp\u003eThis mechanical self-locking clamp grips both soft and hardened shafts far more securely than a set-screw collar, resisting loosening from vibration, shock, and torque while eliminating any need to cut or repair a shaft keyway. The carbon steel collar carries a black oxide coating with a wax finish for corrosion protection and pairs with a hardened alloy fastener tightened to the suggested torque for its size.\u003c\/p\u003e\u003cp\u003eSC-42 is manufactured in the USA and is RoHS compliant, with a maximum operating temperature of 300°F.\u003c\/p\u003e","brand":"Whittet-Higgins","offers":[{"title":"Default Title","offer_id":44051807010966,"sku":null,"price":117.03,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0305\/1241\/4779\/files\/Untitled_Project_19__Camera_SOLIDWORKS_Viewport.png?v=1758474858"},{"product_id":"whittet-higgins-sc-43-clamp-collar","title":"Whittet Higgins SC-43 Clamp Collar","description":"\u003cp\u003eThe Whittet-Higgins SC-43 is a two-piece (split) shaft collar machined to inch dimensions, used to create infinitely adjustable shaft stops, shoulders, and axial location of bearings and other power-transmission components. Its clamshell design assembles around the shaft and is drawn tight by hardened alloy socket head cap screws, so it can be installed or repositioned without removing adjacent components from the shaft.\u003c\/p\u003e\u003cp\u003eThis mechanical self-locking clamp grips both soft and hardened shafts far more securely than a set-screw collar, resisting loosening from vibration, shock, and torque while eliminating any need to cut or repair a shaft keyway. The carbon steel collar carries a black oxide coating with a wax finish for corrosion protection and pairs with a hardened alloy fastener tightened to the suggested torque for its size.\u003c\/p\u003e\u003cp\u003eSC-43 is manufactured in the USA and is RoHS compliant, with a maximum operating temperature of 300°F.\u003c\/p\u003e","brand":"Whittet-Higgins","offers":[{"title":"Default Title","offer_id":44051807830166,"sku":null,"price":122.17,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0305\/1241\/4779\/files\/Untitled_Project_19__Camera_SOLIDWORKS_Viewport.png?v=1758474858"},{"product_id":"whittet-higgins-sc-44-clamp-collar","title":"Whittet Higgins SC-44 Clamp Collar","description":"\u003cp\u003eThe Whittet-Higgins SC-44 is a two-piece (split) shaft collar machined to inch dimensions, used to create infinitely adjustable shaft stops, shoulders, and axial location of bearings and other power-transmission components. Its clamshell design assembles around the shaft and is drawn tight by hardened alloy socket head cap screws, so it can be installed or repositioned without removing adjacent components from the shaft.\u003c\/p\u003e\u003cp\u003eThis mechanical self-locking clamp grips both soft and hardened shafts far more securely than a set-screw collar, resisting loosening from vibration, shock, and torque while eliminating any need to cut or repair a shaft keyway. The carbon steel collar carries a black oxide coating with a wax finish for corrosion protection and pairs with a hardened alloy fastener tightened to the suggested torque for its size.\u003c\/p\u003e\u003cp\u003eSC-44 is manufactured in the USA and is RoHS compliant, with a maximum operating temperature of 300°F.\u003c\/p\u003e","brand":"Whittet-Higgins","offers":[{"title":"Default Title","offer_id":44051812647062,"sku":null,"price":122.17,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0305\/1241\/4779\/files\/Untitled_Project_19__Camera_SOLIDWORKS_Viewport.png?v=1758474858"},{"product_id":"whittet-higgins-sc-45-clamp-collar","title":"Whittet Higgins SC-45 Clamp Collar","description":"\u003cp\u003eThe Whittet-Higgins SC-45 is a two-piece (split) shaft collar machined to inch dimensions, used to create infinitely adjustable shaft stops, shoulders, and axial location of bearings and other power-transmission components. Its clamshell design assembles around the shaft and is drawn tight by hardened alloy socket head cap screws, so it can be installed or repositioned without removing adjacent components from the shaft.\u003c\/p\u003e\u003cp\u003eThis mechanical self-locking clamp grips both soft and hardened shafts far more securely than a set-screw collar, resisting loosening from vibration, shock, and torque while eliminating any need to cut or repair a shaft keyway. The carbon steel collar carries a black oxide coating with a wax finish for corrosion protection and pairs with a hardened alloy fastener tightened to the suggested torque for its size.\u003c\/p\u003e\u003cp\u003eSC-45 is manufactured in the USA and is RoHS compliant, with a maximum operating temperature of 300°F.\u003c\/p\u003e","brand":"Whittet-Higgins","offers":[{"title":"Default Title","offer_id":44051813761174,"sku":null,"price":126.05,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0305\/1241\/4779\/files\/Untitled_Project_19__Camera_SOLIDWORKS_Viewport.png?v=1758474858"},{"product_id":"whittet-higgins-sc-46-clamp-collar","title":"Whittet Higgins SC-46 Clamp Collar","description":"\u003cp\u003eThe Whittet-Higgins SC-46 is a two-piece (split) shaft collar machined to inch dimensions, used to create infinitely adjustable shaft stops, shoulders, and axial location of bearings and other power-transmission components. Its clamshell design assembles around the shaft and is drawn tight by hardened alloy socket head cap screws, so it can be installed or repositioned without removing adjacent components from the shaft.\u003c\/p\u003e\u003cp\u003eThis mechanical self-locking clamp grips both soft and hardened shafts far more securely than a set-screw collar, resisting loosening from vibration, shock, and torque while eliminating any need to cut or repair a shaft keyway. The carbon steel collar carries a black oxide coating with a wax finish for corrosion protection and pairs with a hardened alloy fastener tightened to the suggested torque for its size.\u003c\/p\u003e\u003cp\u003eSC-46 is manufactured in the USA and is RoHS compliant, with a maximum operating temperature of 300°F.\u003c\/p\u003e","brand":"Whittet-Higgins","offers":[{"title":"Default Title","offer_id":44051818152086,"sku":null,"price":122.17,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0305\/1241\/4779\/files\/Untitled_Project_19__Camera_SOLIDWORKS_Viewport.png?v=1758474858"},{"product_id":"whittet-higgins-sc-47-clamp-collar","title":"Whittet Higgins SC-47 Clamp Collar","description":"\u003cp\u003eThe Whittet-Higgins SC-47 is a two-piece (split) shaft collar machined to inch dimensions, used to create infinitely adjustable shaft stops, shoulders, and axial location of bearings and other power-transmission components. Its clamshell design assembles around the shaft and is drawn tight by hardened alloy socket head cap screws, so it can be installed or repositioned without removing adjacent components from the shaft.\u003c\/p\u003e\u003cp\u003eThis mechanical self-locking clamp grips both soft and hardened shafts far more securely than a set-screw collar, resisting loosening from vibration, shock, and torque while eliminating any need to cut or repair a shaft keyway. The carbon steel collar carries a black oxide coating with a wax finish for corrosion protection and pairs with a hardened alloy fastener tightened to the suggested torque for its size.\u003c\/p\u003e\u003cp\u003eSC-47 is manufactured in the USA and is RoHS compliant, with a maximum operating temperature of 300°F.\u003c\/p\u003e","brand":"Whittet-Higgins","offers":[{"title":"Default Title","offer_id":44051819167894,"sku":null,"price":118.77,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0305\/1241\/4779\/files\/Untitled_Project_19__Camera_SOLIDWORKS_Viewport.png?v=1758474858"},{"product_id":"whittet-higgins-sc-48-clamp-collar","title":"Whittet Higgins SC-48 Clamp Collar","description":"\u003cp\u003eThe Whittet-Higgins SC-48 is a two-piece (split) shaft collar machined to inch dimensions, used to create infinitely adjustable shaft stops, shoulders, and axial location of bearings and other power-transmission components. Its clamshell design assembles around the shaft and is drawn tight by hardened alloy socket head cap screws, so it can be installed or repositioned without removing adjacent components from the shaft.\u003c\/p\u003e\u003cp\u003eThis mechanical self-locking clamp grips both soft and hardened shafts far more securely than a set-screw collar, resisting loosening from vibration, shock, and torque while eliminating any need to cut or repair a shaft keyway. The carbon steel collar carries a black oxide coating with a wax finish for corrosion protection and pairs with a hardened alloy fastener tightened to the suggested torque for its size.\u003c\/p\u003e\u003cp\u003eSC-48 is manufactured in the USA and is RoHS compliant, with a maximum operating temperature of 300°F.\u003c\/p\u003e","brand":"Whittet-Higgins","offers":[{"title":"Default Title","offer_id":44051821002902,"sku":null,"price":102.38,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0305\/1241\/4779\/files\/Untitled_Project_19__Camera_SOLIDWORKS_Viewport.png?v=1758474858"},{"product_id":"whittet-higgins-sc-50-clamp-collar","title":"Whittet Higgins SC-50 Clamp Collar","description":"\u003cp\u003eThe Whittet-Higgins SC-50 is a two-piece (split) shaft collar machined to inch dimensions, used to create infinitely adjustable shaft stops, shoulders, and axial location of bearings and other power-transmission components. Its clamshell design assembles around the shaft and is drawn tight by hardened alloy socket head cap screws, so it can be installed or repositioned without removing adjacent components from the shaft.\u003c\/p\u003e\u003cp\u003eThis mechanical self-locking clamp grips both soft and hardened shafts far more securely than a set-screw collar, resisting loosening from vibration, shock, and torque while eliminating any need to cut or repair a shaft keyway. The carbon steel collar carries a black oxide coating with a wax finish for corrosion protection and pairs with a hardened alloy fastener tightened to the suggested torque for its size.\u003c\/p\u003e\u003cp\u003eSC-50 is manufactured in the USA and is RoHS compliant, with a maximum operating temperature of 300°F.\u003c\/p\u003e","brand":"Whittet-Higgins","offers":[{"title":"Default Title","offer_id":44051823296662,"sku":null,"price":671.22,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0305\/1241\/4779\/files\/Untitled_Project_19__Camera_SOLIDWORKS_Viewport.png?v=1758474858"},{"product_id":"whittet-higgins-sc-52-clamp-collar","title":"Whittet Higgins SC-52 Clamp Collar","description":"\u003cp\u003eThe Whittet-Higgins SC-52 is a two-piece (split) shaft collar machined to inch dimensions, used to create infinitely adjustable shaft stops, shoulders, and axial location of bearings and other power-transmission components. Its clamshell design assembles around the shaft and is drawn tight by hardened alloy socket head cap screws, so it can be installed or repositioned without removing adjacent components from the shaft.\u003c\/p\u003e\u003cp\u003eThis mechanical self-locking clamp grips both soft and hardened shafts far more securely than a set-screw collar, resisting loosening from vibration, shock, and torque while eliminating any need to cut or repair a shaft keyway. The carbon steel collar carries a black oxide coating with a wax finish for corrosion protection and pairs with a hardened alloy fastener tightened to the suggested torque for its size.\u003c\/p\u003e\u003cp\u003eSC-52 is manufactured in the USA and is RoHS compliant, with a maximum operating temperature of 300°F.\u003c\/p\u003e","brand":"Whittet-Higgins","offers":[{"title":"Default Title","offer_id":44051824050326,"sku":null,"price":701.78,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0305\/1241\/4779\/files\/Untitled_Project_19__Camera_SOLIDWORKS_Viewport.png?v=1758474858"},{"product_id":"whittet-higgins-sc-54-clamp-collar","title":"Whittet Higgins SC-54 Clamp Collar","description":"\u003cp\u003eThe Whittet-Higgins SC-54 is a two-piece (split) shaft collar machined to inch dimensions, used to create infinitely adjustable shaft stops, shoulders, and axial location of bearings and other power-transmission components. Its clamshell design assembles around the shaft and is drawn tight by hardened alloy socket head cap screws, so it can be installed or repositioned without removing adjacent components from the shaft.\u003c\/p\u003e\u003cp\u003eThis mechanical self-locking clamp grips both soft and hardened shafts far more securely than a set-screw collar, resisting loosening from vibration, shock, and torque while eliminating any need to cut or repair a shaft keyway. The carbon steel collar carries a black oxide coating with a wax finish for corrosion protection and pairs with a hardened alloy fastener tightened to the suggested torque for its size.\u003c\/p\u003e\u003cp\u003eSC-54 is manufactured in the USA and is RoHS compliant, with a maximum operating temperature of 300°F.\u003c\/p\u003e","brand":"Whittet-Higgins","offers":[{"title":"Default Title","offer_id":44051828080790,"sku":null,"price":711.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0305\/1241\/4779\/files\/Untitled_Project_19__Camera_SOLIDWORKS_Viewport.png?v=1758474858"}],"url":"https:\/\/apollousa.com\/collections\/sc-series-two-piece-shaft-collars.oembed","provider":"Apollo Industries ","version":"1.0","type":"link"}