About
Description
-
Belt alignment tool TKBA 40
High-accuracy tool for V-belt pulley alignment
Belt-driven machinery must be precisely aligned in order to increase belt and pulley life – and reduce both machine vibration and energy costs. SKF’s TKBA 40 Belt alignment tool offers a straightforward way to do this, by accurately aligning the grooves of V-belt pulleys. It can correct for vertical angle, horizontal angle, and parallel misalignment. The tool has two components – a laser-emitting unit and a receiver unit. It uses powerful magnets and V-guides to fit to the pulley’s grooves, allowing the TKBA 40 to be attached quickly and easily.
- Fast, easy attachment – using powerful magnets
- Simplified alignment process
- Ability to align a wide range of V-belt pulleys, as four sizes of V-guide are supplied
- Simultaneous adjustment of tension and alignment
- Aligns grooves – rather than faces – of V-belt pulley, for optimum alignment of pulleys of dissimilar widths or faces
- Optional extra: a special side adaptor allows alignment of multi-ribbed and timing belt pulleys, as well as sprockets
- Maximum operating distance of 6 m (20 ft) accommodates many applications
- Relies on red laser diode, and is supplied in a sturdy carrying case
- Runs on 2 × AAA batteries for 20 hours of continuous operation
| Attribute | Details |
|---|---|
| Designation | TKBA 40 |
| Type of Laser | Red laser diode |
| Laser | 1 × Built-in class 2 laser, <1 mW, 632 nm |
| Laser Line Length | 3 m at 2 m (9.8 ft at 6.6 ft) |
| Measurement Accuracy Angular | Better than 0.2° |
| Measurement Accuracy Offset | Better than 0.5 mm (0.02 in.) |
| Measurement Distance | 50 mm to 6,000 mm (2 in. to 20 ft) |
| Control | Laser on/off switch |
| Transmitter Housing Material | Extruded aluminium |
| Receiver Housing Material | Aluminium |
| Fixtures Mounting | Magnetic, groove mounted (optional side adapter TMEB A2) |
| V-guides | Size 1: 22 mm, short rods (3× pairs) Size 2: 22 mm, long rods (3× pairs) Size 3: 40 mm, short rods (3× pairs) Size 4: 40 mm, long rods (3× pairs) |
| Battery | 2× AAA Alkaline type IEC LR03 |
| Operation Time | 20 hours continuous operation |
| Operating Temperature | 0 to 40 °C (32 to 104 °F) |
| Storage Temperature | –20 to +65 °C (–4 to +150 °F) |
| Relative Humidity | 10 to 90% RH non-condensing |
| IP Rating | IP 40 |
| Calibration Certificate | Valid for two years |
| Transmitter Unit Dimensions | 70 × 74 × 61 mm (2.8 × 2.9 × 2.4 in.) |
| Receiver Unit Dimensions | 96 × 74 × 61 mm (3.8 × 2.9 × 2.4 in.) |
| Carrying Case Dimensions | 260 × 85 × 180 mm (10.2 × 3.3 × 7.1 in.) |
| Transmitter Unit Weight | 320 g (0.7 lb) |
| Receiver Unit Weight | 270 g (0.6 lb) |
| Total Weight (incl. case) | 1.2 kg (2.7 lb) |
| Case Contents | 1 × TKBA 40 transmitter unit 1 × TKBA 40 receiver unit 2 × AA batteries 4 × sizes of V-guides, 3 × of each size 1 × Printed instructions for use 1 × Calibration certificate |
Description
-
Belt alignment tool TKBA 40
High-accuracy tool for V-belt pulley alignment
Belt-driven machinery must be precisely aligned in order to increase belt and pulley life – and reduce both machine vibration and energy costs. SKF’s TKBA 40 Belt alignment tool offers a straightforward way to do this, by accurately aligning the grooves of V-belt pulleys. It can correct for vertical angle, horizontal angle, and parallel misalignment. The tool has two components – a laser-emitting unit and a receiver unit. It uses powerful magnets and V-guides to fit to the pulley’s grooves, allowing the TKBA 40 to be attached quickly and easily.
- Fast, easy attachment – using powerful magnets
- Simplified alignment process
- Ability to align a wide range of V-belt pulleys, as four sizes of V-guide are supplied
- Simultaneous adjustment of tension and alignment
- Aligns grooves – rather than faces – of V-belt pulley, for optimum alignment of pulleys of dissimilar widths or faces
- Optional extra: a special side adaptor allows alignment of multi-ribbed and timing belt pulleys, as well as sprockets
- Maximum operating distance of 6 m (20 ft) accommodates many applications
- Relies on red laser diode, and is supplied in a sturdy carrying case
- Runs on 2 × AAA batteries for 20 hours of continuous operation
| Attribute | Details |
|---|---|
| Designation | TKBA 40 |
| Type of Laser | Red laser diode |
| Laser | 1 × Built-in class 2 laser, <1 mW, 632 nm |
| Laser Line Length | 3 m at 2 m (9.8 ft at 6.6 ft) |
| Measurement Accuracy Angular | Better than 0.2° |
| Measurement Accuracy Offset | Better than 0.5 mm (0.02 in.) |
| Measurement Distance | 50 mm to 6,000 mm (2 in. to 20 ft) |
| Control | Laser on/off switch |
| Transmitter Housing Material | Extruded aluminium |
| Receiver Housing Material | Aluminium |
| Fixtures Mounting | Magnetic, groove mounted (optional side adapter TMEB A2) |
| V-guides | Size 1: 22 mm, short rods (3× pairs) Size 2: 22 mm, long rods (3× pairs) Size 3: 40 mm, short rods (3× pairs) Size 4: 40 mm, long rods (3× pairs) |
| Battery | 2× AAA Alkaline type IEC LR03 |
| Operation Time | 20 hours continuous operation |
| Operating Temperature | 0 to 40 °C (32 to 104 °F) |
| Storage Temperature | –20 to +65 °C (–4 to +150 °F) |
| Relative Humidity | 10 to 90% RH non-condensing |
| IP Rating | IP 40 |
| Calibration Certificate | Valid for two years |
| Transmitter Unit Dimensions | 70 × 74 × 61 mm (2.8 × 2.9 × 2.4 in.) |
| Receiver Unit Dimensions | 96 × 74 × 61 mm (3.8 × 2.9 × 2.4 in.) |
| Carrying Case Dimensions | 260 × 85 × 180 mm (10.2 × 3.3 × 7.1 in.) |
| Transmitter Unit Weight | 320 g (0.7 lb) |
| Receiver Unit Weight | 270 g (0.6 lb) |
| Total Weight (incl. case) | 1.2 kg (2.7 lb) |
| Case Contents | 1 × TKBA 40 transmitter unit 1 × TKBA 40 receiver unit 2 × AA batteries 4 × sizes of V-guides, 3 × of each size 1 × Printed instructions for use 1 × Calibration certificate |
SKF
by
SKF
SKF TKBA 40 Red Laser High-accuracy tool for V-belt pulley alignment
- Regular price
- $1,950.00
- Sale price
- $1,950.00
- Regular price
-
17 in Stock Now
Orders placed before 3:00pm (Est) ship same day
Lightning-fast shipping, guaranteed.
Free 90-day returns
Shop risk-free with easy returns.
Need Help?
Call us 1 (248) 429-9073
