Kukko 54-2 Double-Edge Mechanic Nut Splitter, Classes 5, 6 & 8, 3/8"(10mm) - 1-1/16"(27mm) - Apollo Industries llc

About

Description

Double-edged models exerting twice the normal splitting force on irretrievable nuts in quality classes 5, 6 and 8.

One operation through double cutting action.
Splitting nuts can be done without damaging the threaded bolt.
The nut splitters band provides additional support when turning the chisel back.
Chisel available as a replacement part, time-saving order process thanks to numbering system.

Two hardened chisel cutting edges. Gently turn the chisel in the other direction by pulling back. The splitting chisels of the nut splitters are wearing parts. Blunt, pitted or broken chisels must be replaced immediately. Do not use any electrical or pneumatic servo screwdrivers or hammer drills. Protective blanket required. Protective goggles required.

Hexagon Drive (Male) (Metric) 17mm
Cutting Width Of Chisel (Metric) 14mm
Cutting Width Of Chisel 5/8 "
Nut Size (Metric) 10 - 27mm
Length Without Spindle (Metric) 109mm

Description

Double-edged models exerting twice the normal splitting force on irretrievable nuts in quality classes 5, 6 and 8.

One operation through double cutting action.
Splitting nuts can be done without damaging the threaded bolt.
The nut splitters band provides additional support when turning the chisel back.
Chisel available as a replacement part, time-saving order process thanks to numbering system.