About
Description
The SKF TMBS 100E strong back puller facilitates dismounting of bearings in applications where the use of traditional jaw pullers is restricted due to lack of space or when the application requires a long reach. The puller is operated with a hydraulic spindle for effortless dismounting up to 100 kN (11.2 US ton). A special separator design is used that can be easily inserted between the bearing and the shoulder on the shaft.
-
- Easily separator placement between bearing and shoulder on the shaft
- Especially suitable for larger shaft diameter
- Spring-loaded centre point of spindle allows easy puller centring and minimises the risk of shaft damage
- Hydraulic spindle with safety valve for safe and effortless dismounting
- Firm grip behind the bearing's inner ring reduces the force required to dismount the bearing
- Quick adaptation to required pulling length with 2x hydraulic spindle extension pieces and extension rods for pullings lengths up to 816 mm (32.1 in.)
| Category | Specification | Details |
|---|---|---|
| General | Designation | TMHC 110E |
| Description | Advanced hydraulic puller kit | |
| Contents | Arm Assembly Stand | 1 x arm-assembly stand |
| Arms Set 1 | 3 x arms, set 1 (TMHP10E-9) | |
| Arms Set 2 | 3 x arms, set 2 (TMHP10E-10) | |
| Separator Set | 1 x separator set | |
| Beam | 1 x beam | |
| Main Rods | 2 x main rods | |
| Extension Rods | 2 x extension rods, 125 mm (4.9 in) | |
| Hydraulic Spindle | 1 x hydraulic spindle TMHS 100 | |
| Extension Pieces for Hydraulic Spindle | 2 x extension pieces for hydraulic spindle; 50, 100 mm (2.0, 3.9 in) | |
| Nosepiece with Centre Point for Hydraulic Spindle | 1 x nosepiece with centre point for hydraulic spindle | |
| Jaw Puller | Effective Arms Length, Set 1 | 65 mm (2.5 in) |
| Width of Grip, Set 1 | 50-110 mm (2-4.3 in) | |
| Claw Height, Set 1 | 8 mm (0.3 in) | |
| Effective Arms Length, Set 2 | 115 mm (4.5 in) | |
| Width of Grip, Set 2 | 75-170 mm (2.9-6.7 in) | |
| Claw Height, Set 2 | 8 mm (0.3 in) | |
| Hydraulic Specifications | Maximum Stroke | 80 mm (3.1 in) |
| Nominal Working Force | 100 kN (11.2 US ton force) | |
| Cycle Life Hydraulic Cylinder | Minimum 5000 cycles up to 100 kN (11.2 US ton force) | |
| Threading Hydraulic Cylinder | UN 1½'' x 16 tpi | |
| Safety Valve Setting Hydraulic Cylinder | 105 kN (11.8 US ton force) | |
| Total Spindle Length | 19.8 in (incl. 2 available extension pieces) | |
| Strong Back Puller | Maximum Reach | 250 mm (9.8 in) |
| Shaft Diameter Range | 20 - 100 mm (0.8 - 4 in) | |
| Dimensions | Hydraulic Spindle, Piston Stroke | 3.15 in |
| Puller Adaptor Thread | UN 1.5 x 16 tpi | |
| Workpiece Outer Diameter Range (using separator) | 1.7 to 8.5 in | |
| Shaft Diameter Range (using separator) | 1.4 to 6 in | |
| Reach (using separator, max) | 32.1 in (using all extension rods provided) | |
| Separator Height | 1.339 in | |
| Carrying Case Dimensions | 580 x 410 x 70 mm (23 x 16 x 2.8 in) | |
| Weight | 13.5 kg (29.8 lb) |
Description
The SKF TMBS 100E strong back puller facilitates dismounting of bearings in applications where the use of traditional jaw pullers is restricted due to lack of space or when the application requires a long reach. The puller is operated with a hydraulic spindle for effortless dismounting up to 100 kN (11.2 US ton). A special separator design is used that can be easily inserted between the bearing and the shoulder on the shaft.
-
- Easily separator placement between bearing and shoulder on the shaft
- Especially suitable for larger shaft diameter
- Spring-loaded centre point of spindle allows easy puller centring and minimises the risk of shaft damage
- Hydraulic spindle with safety valve for safe and effortless dismounting
- Firm grip behind the bearing's inner ring reduces the force required to dismount the bearing
- Quick adaptation to required pulling length with 2x hydraulic spindle extension pieces and extension rods for pullings lengths up to 816 mm (32.1 in.)
| Category | Specification | Details |
|---|---|---|
| General | Designation | TMHC 110E |
| Description | Advanced hydraulic puller kit | |
| Contents | Arm Assembly Stand | 1 x arm-assembly stand |
| Arms Set 1 | 3 x arms, set 1 (TMHP10E-9) | |
| Arms Set 2 | 3 x arms, set 2 (TMHP10E-10) | |
| Separator Set | 1 x separator set | |
| Beam | 1 x beam | |
| Main Rods | 2 x main rods | |
| Extension Rods | 2 x extension rods, 125 mm (4.9 in) | |
| Hydraulic Spindle | 1 x hydraulic spindle TMHS 100 | |
| Extension Pieces for Hydraulic Spindle | 2 x extension pieces for hydraulic spindle; 50, 100 mm (2.0, 3.9 in) | |
| Nosepiece with Centre Point for Hydraulic Spindle | 1 x nosepiece with centre point for hydraulic spindle | |
| Jaw Puller | Effective Arms Length, Set 1 | 65 mm (2.5 in) |
| Width of Grip, Set 1 | 50-110 mm (2-4.3 in) | |
| Claw Height, Set 1 | 8 mm (0.3 in) | |
| Effective Arms Length, Set 2 | 115 mm (4.5 in) | |
| Width of Grip, Set 2 | 75-170 mm (2.9-6.7 in) | |
| Claw Height, Set 2 | 8 mm (0.3 in) | |
| Hydraulic Specifications | Maximum Stroke | 80 mm (3.1 in) |
| Nominal Working Force | 100 kN (11.2 US ton force) | |
| Cycle Life Hydraulic Cylinder | Minimum 5000 cycles up to 100 kN (11.2 US ton force) | |
| Threading Hydraulic Cylinder | UN 1½'' x 16 tpi | |
| Safety Valve Setting Hydraulic Cylinder | 105 kN (11.8 US ton force) | |
| Total Spindle Length | 19.8 in (incl. 2 available extension pieces) | |
| Strong Back Puller | Maximum Reach | 250 mm (9.8 in) |
| Shaft Diameter Range | 20 - 100 mm (0.8 - 4 in) | |
| Dimensions | Hydraulic Spindle, Piston Stroke | 3.15 in |
| Puller Adaptor Thread | UN 1.5 x 16 tpi | |
| Workpiece Outer Diameter Range (using separator) | 1.7 to 8.5 in | |
| Shaft Diameter Range (using separator) | 1.4 to 6 in | |
| Reach (using separator, max) | 32.1 in (using all extension rods provided) | |
| Separator Height | 1.339 in | |
| Carrying Case Dimensions | 580 x 410 x 70 mm (23 x 16 x 2.8 in) | |
| Weight | 13.5 kg (29.8 lb) |
SKF
by
SKF
SKF TMBS 150E Strong Back External Puller, 11.2ton Capacity, 32-1/2" Reach, 1.6" - 6" Spread
- Regular price
- €1.063,95
- Sale price
- €1.063,95
- Regular price
-
4 in Stock Now
Orders placed before 3:00pm (Est) ship same day
Lightning-fast shipping, guaranteed.
Free 90-day returns
Shop risk-free with easy returns.
Need Help?
Call us 1 (248) 429-9073
