About
The TMHC 110E is a hydraulic puller kit that combines a jaw puller and a strong back puller. The kit includes two arm sets with different lengths that can be used in 2-arm or 3-arm configuration and a back puller with a maximum reach of 250 mm (9.8 in.). The hydraulic spindle with safety valve enables safe and effortless dismounting for various bearings and components. The spring-loaded centre piece and self-locking puller arms further support safe and easy puller operation.
• Versatile kit with two different arm lengths usable in 2-arm or 3-arm configuration and strong back puller
• Effortless dismounting with hydraulic spindle
• Self-locking arms minimise risks of slippage under load
• Spring-loaded centre point allows easy puller centring
• Supplied with two hydraulic spindle extension pieces to allow quick adaptation to required pulling length
• Hydraulic spindle is equipped with safety valve to prevent puller overload
| Category | Specification | Details |
|---|---|---|
| General | Designation | TMHC 110E |
| Description | Advanced hydraulic puller kit | |
| Contents | Arm Assembly Stand | 1 x arm-assembly stand |
| Arms Set 1 | 3 x arms, set 1 (TMHP10E-9) | |
| Arms Set 2 | 3 x arms, set 2 (TMHP10E-10) | |
| Separator Set | 1 x separator set | |
| Beam | 1 x beam | |
| Main Rods | 2 x main rods | |
| Extension Rods | 2 x extension rods, 125 mm (4.9 in) | |
| Hydraulic Spindle | 1 x hydraulic spindle TMHS 100 | |
| Extension Pieces for Hydraulic Spindle | 2 x extension pieces for hydraulic spindle; 50, 100 mm (2.0, 3.9 in) | |
| Nosepiece with Centre Point for Hydraulic Spindle | 1 x nosepiece with centre point for hydraulic spindle | |
| Jaw Puller | Effective Arms Length, Set 1 | 65 mm (2.5 in) |
| Width of Grip, Set 1 | 50-110 mm (2-4.3 in) | |
| Claw Height, Set 1 | 8 mm (0.3 in) | |
| Effective Arms Length, Set 2 | 115 mm (4.5 in) | |
| Width of Grip, Set 2 | 75-170 mm (2.9-6.7 in) | |
| Claw Height, Set 2 | 8 mm (0.3 in) | |
| Hydraulic Specifications | Maximum Stroke | 80 mm (3.1 in) |
| Nominal Working Force | 100 kN (11.2 US ton force) | |
| Cycle Life Hydraulic Cylinder | Minimum 5000 cycles up to 100 kN (11.2 US ton force) | |
| Threading Hydraulic Cylinder | UN 1½'' x 16 tpi | |
| Safety Valve Setting Hydraulic Cylinder | 105 kN (11.8 US ton force) | |
| Strong Back Puller | Maximum Reach | 250 mm (9.8 in) |
| Shaft Diameter Range | 20 - 100 mm (0.8 - 4 in) | |
| Carrying Case Dimensions | Dimensions | 580 x 410 x 70 mm (23 x 16 x 2.8 in) |
| Weight | 13.5 kg (29.8 lb) |
The TMHC 110E is a hydraulic puller kit that combines a jaw puller and a strong back puller. The kit includes two arm sets with different lengths that can be used in 2-arm or 3-arm configuration and a back puller with a maximum reach of 250 mm (9.8 in.). The hydraulic spindle with safety valve enables safe and effortless dismounting for various bearings and components. The spring-loaded centre piece and self-locking puller arms further support safe and easy puller operation.
• Versatile kit with two different arm lengths usable in 2-arm or 3-arm configuration and strong back puller
• Effortless dismounting with hydraulic spindle
• Self-locking arms minimise risks of slippage under load
• Spring-loaded centre point allows easy puller centring
• Supplied with two hydraulic spindle extension pieces to allow quick adaptation to required pulling length
• Hydraulic spindle is equipped with safety valve to prevent puller overload
| Category | Specification | Details |
|---|---|---|
| General | Designation | TMHC 110E |
| Description | Advanced hydraulic puller kit | |
| Contents | Arm Assembly Stand | 1 x arm-assembly stand |
| Arms Set 1 | 3 x arms, set 1 (TMHP10E-9) | |
| Arms Set 2 | 3 x arms, set 2 (TMHP10E-10) | |
| Separator Set | 1 x separator set | |
| Beam | 1 x beam | |
| Main Rods | 2 x main rods | |
| Extension Rods | 2 x extension rods, 125 mm (4.9 in) | |
| Hydraulic Spindle | 1 x hydraulic spindle TMHS 100 | |
| Extension Pieces for Hydraulic Spindle | 2 x extension pieces for hydraulic spindle; 50, 100 mm (2.0, 3.9 in) | |
| Nosepiece with Centre Point for Hydraulic Spindle | 1 x nosepiece with centre point for hydraulic spindle | |
| Jaw Puller | Effective Arms Length, Set 1 | 65 mm (2.5 in) |
| Width of Grip, Set 1 | 50-110 mm (2-4.3 in) | |
| Claw Height, Set 1 | 8 mm (0.3 in) | |
| Effective Arms Length, Set 2 | 115 mm (4.5 in) | |
| Width of Grip, Set 2 | 75-170 mm (2.9-6.7 in) | |
| Claw Height, Set 2 | 8 mm (0.3 in) | |
| Hydraulic Specifications | Maximum Stroke | 80 mm (3.1 in) |
| Nominal Working Force | 100 kN (11.2 US ton force) | |
| Cycle Life Hydraulic Cylinder | Minimum 5000 cycles up to 100 kN (11.2 US ton force) | |
| Threading Hydraulic Cylinder | UN 1½'' x 16 tpi | |
| Safety Valve Setting Hydraulic Cylinder | 105 kN (11.8 US ton force) | |
| Strong Back Puller | Maximum Reach | 250 mm (9.8 in) |
| Shaft Diameter Range | 20 - 100 mm (0.8 - 4 in) | |
| Carrying Case Dimensions | Dimensions | 580 x 410 x 70 mm (23 x 16 x 2.8 in) |
| Weight | 13.5 kg (29.8 lb) |
SKF TMHC 110E Hydraulic Puller Kit, Jaw Puller and Strong Back Puller, 112 Ton Capacity
- Regular price
- €1.202,95
- Sale price
- €1.202,95
- Regular price
-
Free Shipping
Free shipping on orders over 100$
Use code: FREESHIP